# Logout the perspective session of Edge and Standard Gateway

**URL:** <https://forum.inductiveautomation.com/t/logout-the-perspective-session-of-edge-and-standard-gateway/113449>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [January 21, 2026, 2:44pm UTC](https://forum.inductiveautomation.com/t/logout-the-perspective-session-of-edge-and-standard-gateway/113449 "2026-01-21T14:44:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![suraj.shelake](https://avatars.discourse-cdn.com/v4/letter/s/76d3ee/32.png) [@suraj.shelake](https://forum.inductiveautomation.com/u/suraj.shelake)\
**Post date:** [January 21, 2026, 2:44pm UTC](https://forum.inductiveautomation.com/t/logout-the-perspective-session-of-edge-and-standard-gateway/113449/1 "2026-01-21T14:44:14Z")

</div>

Hi all,

**Requirement:** Need single point control for the perspective sessions launched from Edge and Standard gateways.

I have 3 different gateways - 2 are Ignition Edge and 1 is standard Ignition. All 3 gateways have their own projects to control same set of PLC parameters and connected to each other in the network.

To avoid the more than single write/modify action on same PLC tag, I want to log out user from the older sessions and keep user logged in where it recently logged in to allow the write/modify actions.

Is there any way to make this work?

Thanks in advance!