# Looking for tips to deal with pipes

**URL:** <https://forum.inductiveautomation.com/t/looking-for-tips-to-deal-with-pipes/110536>\
**Category:** Ignition\
**Tags:** perspective, ignition81\
**Created:** [September 11, 2025, 12:04pm UTC](https://forum.inductiveautomation.com/t/looking-for-tips-to-deal-with-pipes/110536 "2025-09-11T12:04:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ahmedsaeeed907](https://avatars.discourse-cdn.com/v4/letter/a/fbc32d/32.png) [@ahmedsaeeed907](https://forum.inductiveautomation.com/u/ahmedsaeeed907)\
**Post date:** [September 11, 2025, 12:04pm UTC](https://forum.inductiveautomation.com/t/looking-for-tips-to-deal-with-pipes/110536/1 "2025-09-11T12:04:44Z")

</div>

here I drew the pipes using the draw pipe tool, so I make the root container (Coordinate Type) in The Percent Mode to dynamically Scale while zooming in and out. it works fine with the other components, but with this type of pipes it messes up like it appears in the images.

so could anyone tell me the better solution in that case

 ![p1](https://us1.discourse-cdn.com/inductiveautomation/original/3X/d/9/d96a152aca8cd6cc8ab38bde73ee7dba877794e1.jpeg)

 ![p2](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/1/71b8cca97bf0aae64fc43911336c5a91e0329e00.jpeg)

---

<div class="post-metadata">

**Author:** ![robertm](https://avatars.discourse-cdn.com/v4/letter/r/ea5d25/32.png) [@robertm](https://forum.inductiveautomation.com/u/robertm)\
**Post date:** [September 11, 2025, 12:36pm UTC](https://forum.inductiveautomation.com/t/looking-for-tips-to-deal-with-pipes/110536/2 "2025-09-11T12:36:50Z")

</div>

Don't know the solution, but sounds like this: [How to create new Perspective Component Symbols? - #2 by nminchin](https://forum.inductiveautomation.com/t/how-to-create-new-perspective-component-symbols/107318/2)

I think 8.3 specifically addresses pipe drawing issues.