# Losing Alarm History

**URL:** <https://forum.inductiveautomation.com/t/losing-alarm-history/64247>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [September 19, 2022, 7:41pm UTC](https://forum.inductiveautomation.com/t/losing-alarm-history/64247 "2022-09-19T19:41:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nicholas\_Welch](https://avatars.discourse-cdn.com/v4/letter/n/8797f3/32.png) [@Nicholas\_Welch](https://forum.inductiveautomation.com/u/Nicholas_Welch)\
**Post date:** [September 19, 2022, 7:41pm UTC](https://forum.inductiveautomation.com/t/losing-alarm-history/64247/1 "2022-09-19T19:41:27Z")

</div>

I am using Ignition vision edge for a project that I am currently working on. The issue I am having is that if the module loses power or gets power-cycled all of the alarm history is lost. Is there a reason for this, and is there a fix to not allow this to happen?

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [September 19, 2022, 8:04pm UTC](https://forum.inductiveautomation.com/t/losing-alarm-history/64247/2 "2022-09-19T20:04:32Z")

</div>

I would suggest you contact [Support](https://support.inductiveautomation.com). This forum is not an official support venue.

At a minimum, complicating factors include what Ignition version you’re using, where the gateway is installed, what installation mechanism was used (e.g. Docker vs system install), and plenty of other factors.