# Make a fixed view resizable (Factory map image) **URL:** \ **Category:** Ignition\ **Created:** [February 14, 2022, 9:13pm UTC](https://forum.inductiveautomation.com/t/make-a-fixed-view-resizable-factory-map-image/56136 "2022-02-14T21:13:37Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![samuel.moye](https://avatars.discourse-cdn.com/v4/letter/s/b19c9b/32.png) [@samuel.moye](https://forum.inductiveautomation.com/u/samuel.moye)\ **Post date:** [February 14, 2022, 9:13pm UTC](https://forum.inductiveautomation.com/t/make-a-fixed-view-resizable-factory-map-image/56136/1 "2022-02-14T21:13:37Z")
I need to have a view resizable for different screen sizes (HMI, tablets, phones) that has a image1920x1080 and components layered on top that cannot be modified due to it needing to be the exact ratio of 1920x1080. Background - I created a map of our factory to track the location of moving AGV on the floor. I have a image of the factory at an exact ratio of 1920x1080 correlated to the exact X,Y size (in MM) of the factory. I have a icon that updates its X,Y location as the AGV moves in the factory. The MM of the AGV translates directly to the pixels of the map. If I’m on a phone viewing this view it is way too big and I have to scroll around to look at the status of the agv. I ultimately want to have this view resize to the resolution of the phone and have a smaller version of it. I tried to have a iframe “window” of the view but it does not scale to the iframe size either. Any help would be greatly appreciated! ---
**Author:** ![victordcq](https://avatars.discourse-cdn.com/v4/letter/v/f6c823/32.png) [@victordcq](https://forum.inductiveautomation.com/u/victordcq)\ **Post date:** [February 15, 2022, 9:49am UTC](https://forum.inductiveautomation.com/t/make-a-fixed-view-resizable-factory-map-image/56136/2 "2022-02-15T09:49:13Z")
> [@samuel.moye](#): > > due to it needing to be the exact ratio of 1920x1080 > [@samuel.moye](#): > > directly to the pixels of the map. does it need to be the ratio or the same number of pixels? because you could set an aspect ratio of 16:9. better to just use an emmebed view than a iframe though if you already have the view in igntion iframe is more for exteral websites (or for files) ---
**Author:** ![samuel.moye](https://avatars.discourse-cdn.com/v4/letter/s/b19c9b/32.png) [@samuel.moye](https://forum.inductiveautomation.com/u/samuel.moye)\ **Post date:** [February 15, 2022, 10:16pm UTC](https://forum.inductiveautomation.com/t/make-a-fixed-view-resizable-factory-map-image/56136/3 "2022-02-15T22:16:37Z")
I need it to shrink to the size of the phone. I made a flex container view and put an embedded view referenced to the 1920x1080 image and it just adds scroll bars if the screen is smaller. I tried using the percent and a 16x9 aspect ratio thing too but the moving components on the map are referencing x/y value locations (depending on where they are on the map) and dont show up on the screen if its not 1920x1080. I think that is the deal breaker on this now. ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [February 15, 2022, 10:53pm UTC](https://forum.inductiveautomation.com/t/make-a-fixed-view-resizable-factory-map-image/56136/4 "2022-02-15T22:53:01Z")
You’re directly manipulating components on a single view? Have you tried using the view canvas? ---
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [February 16, 2022, 6:01am UTC](https://forum.inductiveautomation.com/t/make-a-fixed-view-resizable-factory-map-image/56136/5 "2022-02-16T06:01:21Z")
> [@paul-griffith](#): > > Have you tried using the view canvas? Wow, I never knew this existed. That's kinda cool 🙂 Now I just have to find somewhere to use it... haha