# Make Data Cable Link For PLC Siemens OP Display Series

**URL:** <https://forum.inductiveautomation.com/t/make-data-cable-link-for-plc-siemens-op-display-series/172>\
**Category:** Archived Topics\
**Created:** [December 29, 2006, 7:00am UTC](https://forum.inductiveautomation.com/t/make-data-cable-link-for-plc-siemens-op-display-series/172 "2006-12-29T07:00:37Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![nuttaphong191](https://avatars.discourse-cdn.com/v4/letter/n/258eb7/32.png) [@nuttaphong191](https://forum.inductiveautomation.com/u/nuttaphong191)\
**Post date:** [December 29, 2006, 7:00am UTC](https://forum.inductiveautomation.com/t/make-data-cable-link-for-plc-siemens-op-display-series/172/1 "2006-12-29T07:00:37Z")

</div>

If you need to make data cable link for plc Siemens OP Display Series you can do like this the first one prepare connecter RS-232C female 9Pin 1 set and RS-232C male 15 Pin 1 set ,shielding cable about 2-3 meter  
[http://www.tryplc.com/Articles/How%20to%20make%20cable%20link%20Siemens.html](http://www.tryplc.com/Articles/How%20to%20make%20cable%20link%20Siemens.html)