# Maker and Rasbery pi & Jetson nano GPIO access

**URL:** <https://forum.inductiveautomation.com/t/maker-and-rasbery-pi-jetson-nano-gpio-access/36344>\
**Category:** Maker\
**Created:** [July 3, 2020, 2:43pm UTC](https://forum.inductiveautomation.com/t/maker-and-rasbery-pi-jetson-nano-gpio-access/36344 "2020-07-03T14:43:29Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [July 3, 2020, 3:19pm UTC](https://forum.inductiveautomation.com/t/maker-and-rasbery-pi-jetson-nano-gpio-access/36344/2 "2020-07-03T15:19:22Z")

</div>

I recommend running the [pigpiod](https://github.com/joan2937/pigpio) daemon and connecting to its socket interface from a long-lived asynchronous thread. The client-side python module for that project looks jython-compatible, but you might want to optimize it. Python’s socket module is notoriously laggy in jython.

---

_[View the full topic](https://forum.inductiveautomation.com/t/maker-and-rasbery-pi-jetson-nano-gpio-access/36344)._