# Maker install on Raspberry Pi

**URL:** <https://forum.inductiveautomation.com/t/maker-install-on-raspberry-pi/47496>\
**Category:** Maker\
**Created:** [June 6, 2021, 9:13am UTC](https://forum.inductiveautomation.com/t/maker-install-on-raspberry-pi/47496 "2021-06-06T09:13:01Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![kcollins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kcollins/32/19646_2.png) [@kcollins](https://forum.inductiveautomation.com/u/kcollins)\
**Post date:** [June 7, 2021, 10:00pm UTC](https://forum.inductiveautomation.com/t/maker-install-on-raspberry-pi/47496/6 "2021-06-07T22:00:37Z")

</div>

FWIW, I’ve had good luck using the [Raspberry Pi Imager](https://www.raspberrypi.org/software/) to setup an SD card (or USB-booted m.2 SATA SSD w/ [Argon One M.2 case](https://www.argon40.com/argon-one-m-2-case-for-raspberry-pi-4.html) ← super neat) for Ubuntu Desktop 64-bit, which would then let you use our AARCH64 build and take advantage of that 8GB of RAM.

---

_[View the full topic](https://forum.inductiveautomation.com/t/maker-install-on-raspberry-pi/47496)._