# Maker Login For Designer

**URL:** <https://forum.inductiveautomation.com/t/maker-login-for-designer/36199>\
**Category:** Maker\
**Created:** [June 30, 2020, 3:41pm UTC](https://forum.inductiveautomation.com/t/maker-login-for-designer/36199 "2020-06-30T15:41:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![brian3](https://avatars.discourse-cdn.com/v4/letter/b/9e8a1a/32.png) [@brian3](https://forum.inductiveautomation.com/u/brian3)\
**Post date:** [June 30, 2020, 3:41pm UTC](https://forum.inductiveautomation.com/t/maker-login-for-designer/36199/1 "2020-06-30T15:41:36Z")

</div>

Super new to this but a little confused by the login on the actual Designer Launcher. I go to launch my new instance and it asks for login credentials.

I have put in my credentials for the site into Designer Launcher for Maker Edition and they do not work. Any insight here or is this something I just have to wait for?

Thanks!

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [June 30, 2020, 3:44pm UTC](https://forum.inductiveautomation.com/t/maker-login-for-designer/36199/2 "2020-06-30T15:44:19Z")

</div>

You should use whatever credentials you configured during the commissioning phase of the install. It’s not linked to your IA account in any way.

---

<div class="post-metadata">

**Author:** ![brian3](https://avatars.discourse-cdn.com/v4/letter/b/9e8a1a/32.png) [@brian3](https://forum.inductiveautomation.com/u/brian3)\
**Post date:** [June 30, 2020, 4:06pm UTC](https://forum.inductiveautomation.com/t/maker-login-for-designer/36199/3 "2020-06-30T16:06:08Z")

</div>

Ok, something I must have just blown by! Thanks Kevin.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [June 30, 2020, 4:06pm UTC](https://forum.inductiveautomation.com/t/maker-login-for-designer/36199/4 "2020-06-30T16:06:56Z")

</div>

If you need to reset the password for any reason you can do it with the GCU: [https://docs.inductiveautomation.com/display/DOC80/Gateway+Command-line+Utility](https://docs.inductiveautomation.com/display/DOC80/Gateway+Command-line+Utility)