# Maker Project folder

**URL:** <https://forum.inductiveautomation.com/t/maker-project-folder/36660>\
**Category:** Maker\
**Created:** [July 13, 2020, 8:52pm UTC](https://forum.inductiveautomation.com/t/maker-project-folder/36660 "2020-07-13T20:52:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![joev](https://avatars.discourse-cdn.com/v4/letter/j/b4bc9f/32.png) [@joev](https://forum.inductiveautomation.com/u/joev)\
**Post date:** [July 13, 2020, 8:52pm UTC](https://forum.inductiveautomation.com/t/maker-project-folder/36660/1 "2020-07-13T20:52:38Z")

</div>

One last suggestion and I will quit pestering you with suggestions.  
Have you though about making a “Maker Projects” category in your forum.  
It would give people a place to show off there maker projects.

Here is a link I posted about Maker Edition in the Nvidia Developers Forum:

> **[Free HMI Scada software install on Jetson nano](https://forums.developer.nvidia.com/t/free-hmi-scada-software-install-on-jetson-nano/141518)**
>
> Inductive Automation has come out with a maker edition of there HMI SCADA software package. Its free to use for hobbyist and tinkers. Here is a video tutorial on how to load on jetson nano and create a simple App

I work with youre software at my job and I like its ease of use and how it runs.  
and putting out a Makers edition is just the cherry on top.

good luck

---

<div class="post-metadata">

**Author:** ![KathyApplebaum](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kathyapplebaum/32/7261_2.png) [@KathyApplebaum](https://forum.inductiveautomation.com/u/KathyApplebaum)\
**Post date:** [July 13, 2020, 10:19pm UTC](https://forum.inductiveautomation.com/t/maker-project-folder/36660/2 "2020-07-13T22:19:42Z")

</div>

We’re hoping you share your projects in [Ignition Exchange](https://inductiveautomation.com/exchange/). 😉

---

<div class="post-metadata">

**Author:** ![joev](https://avatars.discourse-cdn.com/v4/letter/j/b4bc9f/32.png) [@joev](https://forum.inductiveautomation.com/u/joev)\
**Post date:** [July 14, 2020, 12:14am UTC](https://forum.inductiveautomation.com/t/maker-project-folder/36660/3 "2020-07-14T00:14:55Z")

</div>

Sounds good.  
As long as there is a place to earn some bragging rights were good