# Mapped Network Drive with Wrapper **URL:** \ **Category:** Ignition\ **Tags:** ignition80\ **Created:** [February 12, 2021, 8:04pm UTC](https://forum.inductiveautomation.com/t/mapped-network-drive-with-wrapper/43372 "2021-02-12T20:04:34Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![dandersen](https://avatars.discourse-cdn.com/v4/letter/d/ecb155/32.png) [@dandersen](https://forum.inductiveautomation.com/u/dandersen)\ **Post date:** [February 12, 2021, 8:04pm UTC](https://forum.inductiveautomation.com/t/mapped-network-drive-with-wrapper/43372/1 "2021-02-12T20:04:34Z")
I’m trying to setup an network drive using the Ignition manual. I am able to setup a drive that doesn’t need credentials and everything works correctly. The drive that needs credentials seems to be having a problem. I copied the config from the manual but maybe I didn’t get them pasted into the correct section? I have verified that the credentials have read/write access to the network location. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/5/857c7659ead3798ee27cf728bdf3f56c5ee16ee1.png) ---
**Author:** ![Eric.Nielsen](https://avatars.discourse-cdn.com/v4/letter/e/e19b73/32.png) [@Eric.Nielsen](https://forum.inductiveautomation.com/u/Eric.Nielsen)\ **Post date:** [June 24, 2022, 5:00pm UTC](https://forum.inductiveautomation.com/t/mapped-network-drive-with-wrapper/43372/2 "2022-06-24T17:00:21Z")
If anyone comes back to this on Windows, the Ignition service cannot be run under the LocalSystem account when using credentials for network drives. This is a limitation of the Tanuki Wrapper. [wrapper.share.\.\* Properties - Java Service Wrapper](https://wrapper.tanukisoftware.com/doc/english/prop-share-general.html#account) Use a virtual service account, or named user account instead of LocalSystem for wrapper.ntservice.account and the credential mapping of the network drive should work.