# Mapping an Advantech WISE-4012 as a device to ignition

**URL:** <https://forum.inductiveautomation.com/t/mapping-an-advantech-wise-4012-as-a-device-to-ignition/17004>\
**Category:** General Discussion\
**Tags:** ignition79\
**Created:** [February 15, 2018, 6:06pm UTC](https://forum.inductiveautomation.com/t/mapping-an-advantech-wise-4012-as-a-device-to-ignition/17004 "2018-02-15T18:06:45Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![asamboy](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@asamboy](https://forum.inductiveautomation.com/u/asamboy)\
**Post date:** [February 15, 2018, 6:06pm UTC](https://forum.inductiveautomation.com/t/mapping-an-advantech-wise-4012-as-a-device-to-ignition/17004/1 "2018-02-15T18:06:45Z")

</div>

Do anyone have experience mapping the ADVANTECH WISE-4012 to ignintion in order to read and write to its I/O?

---

<div class="post-metadata">

**Author:** ![amontbrun](https://avatars.discourse-cdn.com/v4/letter/a/9de053/32.png) [@amontbrun](https://forum.inductiveautomation.com/u/amontbrun)\
**Post date:** [May 7, 2019, 4:21pm UTC](https://forum.inductiveautomation.com/t/mapping-an-advantech-wise-4012-as-a-device-to-ignition/17004/2 "2019-05-07T16:21:50Z")

</div>

> [@asamboy](#):
>
> ADVANTECH WISE-4012

Hello, I am also interested on this topic. Regards,

AM

---

<div class="post-metadata">

**Author:** ![tamerplc](https://avatars.discourse-cdn.com/v4/letter/t/d78d45/32.png) [@tamerplc](https://forum.inductiveautomation.com/u/tamerplc)\
**Post date:** [May 13, 2019, 6:49pm UTC](https://forum.inductiveautomation.com/t/mapping-an-advantech-wise-4012-as-a-device-to-ignition/17004/3 "2019-05-13T18:49:07Z")

</div>

> [@asamboy](#):
>
> ADVANTECH WISE-4012

check this linke may it will help you ..  
[http://advdownload.advantech.com/productfile/Downloadfile5/1-1L5RLLB/IAG\_FAQ%20WISE-4000%20How%20to%20connect%20Mosquitto%20with%20iSensing%20MQTT\_20190108.zip](http://advdownload.advantech.com/productfile/Downloadfile5/1-1L5RLLB/IAG_FAQ%20WISE-4000%20How%20to%20connect%20Mosquitto%20with%20iSensing%20MQTT_20190108.zip)

---

<div class="post-metadata">

**Author:** ![abishur](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/abishur/32/9096_2.png) [@abishur](https://forum.inductiveautomation.com/u/abishur)\
**Post date:** [May 15, 2019, 4:43pm UTC](https://forum.inductiveautomation.com/t/mapping-an-advantech-wise-4012-as-a-device-to-ignition/17004/4 "2019-05-15T16:43:59Z")

</div>

According to the manual (Check out Appendix A.6 for your device) it supports Modbus TCP. Create a new device in the gateway using the Modbus TCP driver, in the hostname give it the IP address of your device, and you will be able to start reading registers from the device.

---

<div class="post-metadata">

**Author:** ![Claudio\_Burgos](https://avatars.discourse-cdn.com/v4/letter/c/85f322/32.png) [@Claudio\_Burgos](https://forum.inductiveautomation.com/u/Claudio_Burgos)\
**Post date:** [December 6, 2024, 1:44pm UTC](https://forum.inductiveautomation.com/t/mapping-an-advantech-wise-4012-as-a-device-to-ignition/17004/5 "2024-12-06T13:44:43Z")

</div>

I know I am very late to the party, but this is a quick screenshot on how I was able to read all (4) digital inputs from a WISE-4012 within Ignition in order to use them as triggers to collect data. I am sure it will help those who are looking for this information as I was 🙂

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/f/8f4868b32b5e39b1af5005a12e3b3c18aa5cf6ba.png)