# MES Waste Drill Down

**URL:** <https://forum.inductiveautomation.com/t/mes-waste-drill-down/103182>\
**Category:** Ignition\
**Created:** [March 4, 2025, 12:46am UTC](https://forum.inductiveautomation.com/t/mes-waste-drill-down/103182 "2025-03-04T00:46:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![garth1reynolds](https://avatars.discourse-cdn.com/v4/letter/g/e9c0ed/32.png) [@garth1reynolds](https://forum.inductiveautomation.com/u/garth1reynolds)\
**Post date:** [March 4, 2025, 12:46am UTC](https://forum.inductiveautomation.com/t/mes-waste-drill-down/103182/1 "2025-03-04T00:46:20Z")

</div>

Hi

One for the MES guys out there:

Is there a way to set up an Analysis Controller for multiple sources of waste counts not just total count per cell or per line?

Trying to show the split between sources of waste on a chart but struggling using the MES tools.

Running Ignition 7.6.4 and Sepesoft MES 1.0

---

<div class="post-metadata">

**Author:** ![garth1reynolds](https://avatars.discourse-cdn.com/v4/letter/g/e9c0ed/32.png) [@garth1reynolds](https://forum.inductiveautomation.com/u/garth1reynolds)\
**Post date:** [March 4, 2025, 12:54am UTC](https://forum.inductiveautomation.com/t/mes-waste-drill-down/103182/2 "2025-03-04T00:54:35Z")

</div>

![Controller Analysis Parameters](https://us1.discourse-cdn.com/inductiveautomation/original/3X/f/0/f087ee83c402c2f0e759ff3cc8e689ad62a2a9bd.png)  
 ![Waste Sources](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/2/12f41fa3736793fa30b1f636b49ae6691ceb99fc.png)