# Meter in ignition

**URL:** <https://forum.inductiveautomation.com/t/meter-in-ignition/9820>\
**Category:** Ignition\
**Created:** [March 19, 2015, 10:52pm UTC](https://forum.inductiveautomation.com/t/meter-in-ignition/9820 "2015-03-19T22:52:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![wurthrs](https://avatars.discourse-cdn.com/v4/letter/w/7993a0/32.png) [@wurthrs](https://forum.inductiveautomation.com/u/wurthrs)\
**Post date:** [March 19, 2015, 10:52pm UTC](https://forum.inductiveautomation.com/t/meter-in-ignition/9820/1 "2015-03-19T22:52:27Z")

</div>

Hi all

I don’t know if others have had this issue but I am using 3 meters to display PH levels. I have changed the dials to go from 0 to 14 and it comes up fine when it is viewed thru the designer, but when it is published it reverts back to 0 - 100. Am I missing something?

Thanks  
Bob

---

<div class="post-metadata">

**Author:** ![KathyApplebaum](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kathyapplebaum/32/7261_2.png) [@KathyApplebaum](https://forum.inductiveautomation.com/u/KathyApplebaum)\
**Post date:** [March 20, 2015, 2:27pm UTC](https://forum.inductiveautomation.com/t/meter-in-ignition/9820/2 "2015-03-20T14:27:58Z")

</div>

I can’t replicate this problem in 7.7.4.

Can you let us know the Ignition version and attach a small [SSCCE](http://sscce.org) project that shows this happening?