# MICRO 800 ROCKWELL PLC Driver

**URL:** <https://forum.inductiveautomation.com/t/micro-800-rockwell-plc-driver/86577>\
**Category:** Ignition\
**Tags:** ignition81, rockwell\
**Created:** [February 29, 2024, 6:21am UTC](https://forum.inductiveautomation.com/t/micro-800-rockwell-plc-driver/86577 "2024-02-29T06:21:25Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Adarsh\_Shelar](https://avatars.discourse-cdn.com/v4/letter/a/f07891/32.png) [@Adarsh\_Shelar](https://forum.inductiveautomation.com/u/Adarsh_Shelar)\
**Post date:** [February 29, 2024, 6:21am UTC](https://forum.inductiveautomation.com/t/micro-800-rockwell-plc-driver/86577/1 "2024-02-29T06:21:25Z")

</div>

Hi folks,  
**In the New Ignition of the or Latest Release Version there is any way to connect the Micro 800 PLC direct to the Ignition Using the Driver.**

For existing in our system, we are taking from the Kepware 3rd party software through TCP/IP Driver to overcome this one is there any way to connect the Micro 800 Rockwell PLC TO the Ignition, if Available.  
1, At which Version its Available?  
2. Driver name.?

Thank you for advance.  
Adarsh ✨

---

<div class="post-metadata">

**Author:** ![dhananjay\_vichare](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dhananjay_vichare/32/74712_2.png) [@dhananjay\_vichare](https://forum.inductiveautomation.com/u/dhananjay_vichare)\
**Post date:** [February 29, 2024, 6:56am UTC](https://forum.inductiveautomation.com/t/micro-800-rockwell-plc-driver/86577/2 "2024-02-29T06:56:09Z")

</div>

This help you!

> [@Micro800 Driver Beta](https://forum.inductiveautomation.com/t/micro800-driver-beta/85310):
>
> General The beta Micro800 driver must be installed with the latest Ignition 8.1.38 Nightly (dated Feb 2nd or later) and is capable of running on all editions of Ignition. The driver supports communication with the following Allen-Bradley Micro800 PLCs via EtherNet/IP over TCP/IP: Micro820 Micro850 Micro870 Data Types The driver supports the following atomic Micro800 data types: DATE (numerical value representing milliseconds since Unix epoch) TIME (numerical value representing milliseconds) …

---

<div class="post-metadata">

**Author:** ![lparrotta](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lparrotta/32/13114_2.png) [@lparrotta](https://forum.inductiveautomation.com/u/lparrotta)\
**Post date:** [April 4, 2024, 2:15pm UTC](https://forum.inductiveautomation.com/t/micro-800-rockwell-plc-driver/86577/4 "2024-04-04T14:15:19Z")

</div>

Do you expect the Micro800 driver to be included with 8.1.39?  
When do you expect the production release?  
Thanks

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [April 4, 2024, 2:16pm UTC](https://forum.inductiveautomation.com/t/micro-800-rockwell-plc-driver/86577/5 "2024-04-04T14:16:28Z")

</div>

Yes, it will be part of 8.1.39. It's available in the nightly releases right now.

The 8.1.39 release is planned for April 9, 2024.

---

<div class="post-metadata">

**Author:** ![lparrotta](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lparrotta/32/13114_2.png) [@lparrotta](https://forum.inductiveautomation.com/u/lparrotta)\
**Post date:** [April 4, 2024, 2:17pm UTC](https://forum.inductiveautomation.com/t/micro-800-rockwell-plc-driver/86577/6 "2024-04-04T14:17:15Z")

</div>

Thanks. I'll wait until next week and then give it a test drive.