# Micrologix 1400 Tag Bad Quality \[Solved\]

**URL:** <https://forum.inductiveautomation.com/t/micrologix-1400-tag-bad-quality-solved/21479>\
**Category:** Ignition\
**Created:** [December 18, 2018, 5:28pm UTC](https://forum.inductiveautomation.com/t/micrologix-1400-tag-bad-quality-solved/21479 "2018-12-18T17:28:13Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![MMaynard](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mmaynard/32/3366_2.png) [@MMaynard](https://forum.inductiveautomation.com/u/MMaynard)\
**Post date:** [December 19, 2018, 3:48pm UTC](https://forum.inductiveautomation.com/t/micrologix-1400-tag-bad-quality-solved/21479/2 "2018-12-19T15:48:25Z")

</div>

Try setting the connection path on the device

> [@PCCC protocol causing problems](http://forum.inductiveautomation.com/t/pccc-protocol-causing-problems/11651/15):
>
> Ah! I was thinking the driver was falling back to the direct protocol. You won’t be able to block PCCC access via Ethernet/IP without also blocking straight E/IP. Hmmm. Sounds like we need a new advanced setting in the driver. Maybe posting in [ideas.inductiveautomation.com](http://ideas.inductiveautomation.com) would help – I’d upvote it.

---

_[View the full topic](https://forum.inductiveautomation.com/t/micrologix-1400-tag-bad-quality-solved/21479)._