# Mirroring built in components

**URL:** <https://forum.inductiveautomation.com/t/mirroring-built-in-components/1908>\
**Category:** Ignition\
**Created:** [June 7, 2010, 9:53pm UTC](https://forum.inductiveautomation.com/t/mirroring-built-in-components/1908 "2010-06-07T21:53:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fledder](https://avatars.discourse-cdn.com/v4/letter/f/e19b73/32.png) [@fledder](https://forum.inductiveautomation.com/u/fledder)\
**Post date:** [June 7, 2010, 9:53pm UTC](https://forum.inductiveautomation.com/t/mirroring-built-in-components/1908/1 "2010-06-07T21:53:35Z")

</div>

Is there any way to mirror (flip) built-in components? I am speaking specifically of the slider on the inputs palette - I would like to have the tick marks on the left side, and can’t seem to figure out how to do that…

---

<div class="post-metadata">

**Author:** ![AlThePal](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/althepal/32/3603_2.png) [@AlThePal](https://forum.inductiveautomation.com/u/AlThePal)\
**Post date:** [June 8, 2010, 7:13am UTC](https://forum.inductiveautomation.com/t/mirroring-built-in-components/1908/2 "2010-06-08T07:13:19Z")

</div>

afaik, it’s only possible to have the scale and labels either underneath or to the right of the slider. You can turn them off and draw your own, but the pointer will still be pointing to the ‘wrong’ side.

---

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [June 14, 2010, 6:46pm UTC](https://forum.inductiveautomation.com/t/mirroring-built-in-components/1908/3 "2010-06-14T18:46:04Z")

</div>

Sorry, there is no general-purpose mirroring.