# Missing section in Manual **URL:** \ **Category:** Ignition\ **Created:** [April 1, 2010, 1:04am UTC](https://forum.inductiveautomation.com/t/missing-section-in-manual/1709 "2010-04-01T01:04:47Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![ISDProj](https://avatars.discourse-cdn.com/v4/letter/i/58956e/32.png) [@ISDProj](https://forum.inductiveautomation.com/u/ISDProj)\ **Post date:** [April 1, 2010, 1:04am UTC](https://forum.inductiveautomation.com/t/missing-section-in-manual/1709/1 "2010-04-01T01:04:47Z")
The Ignition manual makes several references about seeing the “Reporting Section” for further details. The trouble is that I cannot find any "Reporting section in the manual at all ![:scratch:](https://us1.discourse-cdn.com/inductiveautomation/original/1X/76d1620bec252bfac07050c889ff5a91dc8a9c25.gif ":scratch:") ---
**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\ **Post date:** [April 1, 2010, 4:14pm UTC](https://forum.inductiveautomation.com/t/missing-section-in-manual/1709/2 "2010-04-01T16:14:17Z")
Yes, you’re right, we haven’t transposed the classic Reporting Plugin’s user manual into Ignition’s user manual yet. This will happen shortly. In the meantime - the concepts of using the Reporting module’s components haven’t changed and you can review them in [the classic manual](http://www.inductiveautomation.com/support/usermanuals/reporting/). ---
**Author:** ![ISDProj](https://avatars.discourse-cdn.com/v4/letter/i/58956e/32.png) [@ISDProj](https://forum.inductiveautomation.com/u/ISDProj)\ **Post date:** [April 16, 2010, 4:25am UTC](https://forum.inductiveautomation.com/t/missing-section-in-manual/1709/3 "2010-04-16T04:25:39Z")
Thanks for the link to the Manual Carl. I have dowloaded the Off-line (PDF) version & have started to use the deport designer. A couple of things I have noted already are: 1.) You Can’t Put text Headings on a Crosstab report (unless there is some trick that I have missed) 2.) There is no way of selecting Multiple “cells” in a crosstab and adjust the Height/Width/Alignment as a group. 3.) the report designer “lost the plot” (i.e. wasn’t automatically redrawing the options when selected without having to “click a second time” on the items - sorry that the description is a bit murky, it was a general problem that included not drawing the sizing handles on Cells too.) Exiting the report designer & restarting it did not correct this. Only a complete exit from the ignition Designer & restart corrected it. ---
**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\ **Post date:** [April 16, 2010, 4:12pm UTC](https://forum.inductiveautomation.com/t/missing-section-in-manual/1709/4 "2010-04-16T16:12:25Z")
Thanks for the feedback. The Reporting Module is going to get a pretty serious overhaul for version 2, probably sometime near the end of the year. ---
**Author:** ![ISDProj](https://avatars.discourse-cdn.com/v4/letter/i/58956e/32.png) [@ISDProj](https://forum.inductiveautomation.com/u/ISDProj)\ **Post date:** [April 10, 2012, 10:49pm UTC](https://forum.inductiveautomation.com/t/missing-section-in-manual/1709/5 "2012-04-10T22:49:14Z")
Bump… (Has the report section been “revisited seriously” yet? 😕 ) ---
**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\ **Post date:** [May 9, 2012, 9:40pm UTC](https://forum.inductiveautomation.com/t/missing-section-in-manual/1709/6 "2012-05-09T21:40:52Z")
Well, the manual got merged in for 7.5, but no new reporting module as of yet. Still on the to-do list though!