# Missing tabs when setting up a table in Designer

**URL:** <https://forum.inductiveautomation.com/t/missing-tabs-when-setting-up-a-table-in-designer/45685>\
**Category:** Ignition\
**Created:** [April 16, 2021, 2:41pm UTC](https://forum.inductiveautomation.com/t/missing-tabs-when-setting-up-a-table-in-designer/45685 "2021-04-16T14:41:31Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![jbougie](https://avatars.discourse-cdn.com/v4/letter/j/85e7bf/32.png) [@jbougie](https://forum.inductiveautomation.com/u/jbougie)\
**Post date:** [April 16, 2021, 2:41pm UTC](https://forum.inductiveautomation.com/t/missing-tabs-when-setting-up-a-table-in-designer/45685/1 "2021-04-16T14:41:31Z")

</div>

I am taking the certification test and I need to fix a table but the tabs are missing at the top of the table.

 ![designer issue](https://us1.discourse-cdn.com/inductiveautomation/original/3X/a/f/afdee24e7a187443239a02b979eab5685657da95.png)

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [April 16, 2021, 3:01pm UTC](https://forum.inductiveautomation.com/t/missing-tabs-when-setting-up-a-table-in-designer/45685/2 "2021-04-16T15:01:10Z")

</div>

You can’t ask any certification test questions on the forum.

---

<div class="post-metadata">

**Author:** ![jbougie](https://avatars.discourse-cdn.com/v4/letter/j/85e7bf/32.png) [@jbougie](https://forum.inductiveautomation.com/u/jbougie)\
**Post date:** [April 16, 2021, 3:12pm UTC](https://forum.inductiveautomation.com/t/missing-tabs-when-setting-up-a-table-in-designer/45685/3 "2021-04-16T15:12:49Z")

</div>

not asking a test question

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [April 16, 2021, 3:37pm UTC](https://forum.inductiveautomation.com/t/missing-tabs-when-setting-up-a-table-in-designer/45685/4 "2021-04-16T15:37:43Z")

</div>

Anything related to a certification test question is not permitted here.

---

<div class="post-metadata">

**Author:** ![jbougie](https://avatars.discourse-cdn.com/v4/letter/j/85e7bf/32.png) [@jbougie](https://forum.inductiveautomation.com/u/jbougie)\
**Post date:** [April 16, 2021, 3:38pm UTC](https://forum.inductiveautomation.com/t/missing-tabs-when-setting-up-a-table-in-designer/45685/5 "2021-04-16T15:38:25Z")

</div>

ok I will rephrase it then

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [April 16, 2021, 3:40pm UTC](https://forum.inductiveautomation.com/t/missing-tabs-when-setting-up-a-table-in-designer/45685/6 "2021-04-16T15:40:26Z")

</div>

No, only IA support can tell you if it is something you are supposed to figure out on your own.

---

<div class="post-metadata">

**Author:** ![Paul.Scott](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul.scott/32/4578_2.png) [@Paul.Scott](https://forum.inductiveautomation.com/u/Paul.Scott)\
**Post date:** [April 16, 2021, 4:00pm UTC](https://forum.inductiveautomation.com/t/missing-tabs-when-setting-up-a-table-in-designer/45685/7 "2021-04-16T16:00:56Z")

</div>