# Mitsubishi FX3U **URL:** \ **Category:** Ignition\ **Created:** [January 31, 2020, 4:56pm UTC](https://forum.inductiveautomation.com/t/mitsubishi-fx3u/31826 "2020-01-31T16:56:08Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![HALW80](https://avatars.discourse-cdn.com/v4/letter/h/47e85d/32.png) [@HALW80](https://forum.inductiveautomation.com/u/HALW80)\ **Post date:** [January 31, 2020, 4:56pm UTC](https://forum.inductiveautomation.com/t/mitsubishi-fx3u/31826/1 "2020-01-31T16:56:08Z")
Anyone successfully connected Ignition to Mitsubishi FX3U? If so, what method did you use? ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [January 31, 2020, 4:59pm UTC](https://forum.inductiveautomation.com/t/mitsubishi-fx3u/31826/2 "2020-01-31T16:59:02Z")
Most customers are using Kepware to connect to Mitsubishi PLCs right now. ---
**Author:** ![HALW80](https://avatars.discourse-cdn.com/v4/letter/h/47e85d/32.png) [@HALW80](https://forum.inductiveautomation.com/u/HALW80)\ **Post date:** [February 6, 2020, 9:33am UTC](https://forum.inductiveautomation.com/t/mitsubishi-fx3u/31826/3 "2020-02-06T09:33:35Z")
Thanks, I will download a demo ---
**Author:** ![Kudrot](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kudrot/32/19688_2.png) [@Kudrot](https://forum.inductiveautomation.com/u/Kudrot)\ **Post date:** [April 24, 2021, 6:07am UTC](https://forum.inductiveautomation.com/t/mitsubishi-fx3u/31826/4 "2021-04-24T06:07:36Z")
Hi Emca, Have been successful data updating with Ignition and Kepware (FX3U)? Ignition works fine with Mitsubishi MX OPC server (GX Works2 simulator and PLC either way). I tried to use Kepware, communication is ok, but Quality bad ( data not updating)… ---
**Author:** ![splata](https://avatars.discourse-cdn.com/v4/letter/s/3bc359/32.png) [@splata](https://forum.inductiveautomation.com/u/splata)\ **Post date:** [August 30, 2023, 10:35pm UTC](https://forum.inductiveautomation.com/t/mitsubishi-fx3u/31826/5 "2023-08-30T22:35:09Z")
hello. now in version 8.1.31 support the FX3U?? regards ---
**Author:** ![william.bowen](https://avatars.discourse-cdn.com/v4/letter/w/8c91f0/32.png) [@william.bowen](https://forum.inductiveautomation.com/u/william.bowen)\ **Post date:** [August 30, 2023, 10:50pm UTC](https://forum.inductiveautomation.com/t/mitsubishi-fx3u/31826/6 "2023-08-30T22:50:02Z")
Yes, however you will need a FX3U-ENET module. ---
**Author:** ![Renz\_Eran\_Santos](https://avatars.discourse-cdn.com/v4/letter/r/94ad74/32.png) [@Renz\_Eran\_Santos](https://forum.inductiveautomation.com/u/Renz_Eran_Santos)\ **Post date:** [January 17, 2024, 2:19am UTC](https://forum.inductiveautomation.com/t/mitsubishi-fx3u/31826/8 "2024-01-17T02:19:21Z")
> **[Mitsubishi FX3U-ENET Connection Guide for UDP](https://www.fernhillsoftware.com/help/drivers/mitsubishi-melsec/plc-setup-fx3u-enet.html)** > > A setup guide for the Mitsubishi Melsec FX3U-ENET Ethernet module. Shows you how to monitor and control an FX3-Series PLC using MC Protocol over UDP with Fernhill SCADA. I tried to follow this configuration but its not working and this is for a different brand of SCADA, are these parameters also applicable to Ignition? ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/c/5cd0a2ebbc662d642e5e0ccb8e1e89064bf63bd6.png) ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/b/6b6b25576a3c1338b1a35dd42a03fda32b64d239.png) ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/a/2/a207026e8c30abf154d0988b61b2dc71a7a1013e.png) ---
**Author:** ![william.bowen](https://avatars.discourse-cdn.com/v4/letter/w/8c91f0/32.png) [@william.bowen](https://forum.inductiveautomation.com/u/william.bowen)\ **Post date:** [January 17, 2024, 3:55am UTC](https://forum.inductiveautomation.com/t/mitsubishi-fx3u/31826/9 "2024-01-17T03:55:18Z")
You will almost need to merge that configuration, have a look with the setup described in the manual, [https://docs.inductiveautomation.com/display/DOC81/Mitsubishi+TCP+Driver#MitsubishiTCPDriver-FXConfigurator](https://docs.inductiveautomation.com/display/DOC81/Mitsubishi+TCP+Driver#MitsubishiTCPDriver-FXConfigurator) ---
**Author:** ![Renz\_Eran\_Santos](https://avatars.discourse-cdn.com/v4/letter/r/94ad74/32.png) [@Renz\_Eran\_Santos](https://forum.inductiveautomation.com/u/Renz_Eran_Santos)\ **Post date:** [January 17, 2024, 9:17pm UTC](https://forum.inductiveautomation.com/t/mitsubishi-fx3u/31826/10 "2024-01-17T21:17:05Z")
Thanks, this solves it.