# Mobile module vnc option doesnt recognize mouse scrolling

**URL:** <https://forum.inductiveautomation.com/t/mobile-module-vnc-option-doesnt-recognize-mouse-scrolling/6048>\
**Category:** Ignition\
**Created:** [March 18, 2013, 3:12pm UTC](https://forum.inductiveautomation.com/t/mobile-module-vnc-option-doesnt-recognize-mouse-scrolling/6048 "2013-03-18T15:12:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![diat150](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@diat150](https://forum.inductiveautomation.com/u/diat150)\
**Post date:** [March 18, 2013, 3:12pm UTC](https://forum.inductiveautomation.com/t/mobile-module-vnc-option-doesnt-recognize-mouse-scrolling/6048/1 "2013-03-18T15:12:39Z")

</div>

not sure if this is something that can be fixed but it would be really nice to have.

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [March 18, 2013, 8:54pm UTC](https://forum.inductiveautomation.com/t/mobile-module-vnc-option-doesnt-recognize-mouse-scrolling/6048/2 "2013-03-18T20:54:43Z")

</div>

You can only scroll when you are in hand mode not cursor mode. Hold down your mouse and you will get a wheel where you can select cursor or hand mode.

---

<div class="post-metadata">

**Author:** ![diat150](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@diat150](https://forum.inductiveautomation.com/u/diat150)\
**Post date:** [March 18, 2013, 11:45pm UTC](https://forum.inductiveautomation.com/t/mobile-module-vnc-option-doesnt-recognize-mouse-scrolling/6048/3 "2013-03-18T23:45:37Z")

</div>

Thanks Travis, I was actually talking about the direct vnc connection, not the mobile module.

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [March 19, 2013, 3:36pm UTC](https://forum.inductiveautomation.com/t/mobile-module-vnc-option-doesnt-recognize-mouse-scrolling/6048/4 "2013-03-19T15:36:48Z")

</div>

Oh I see. I will see what we can do.

---

<div class="post-metadata">

**Author:** ![diat150](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@diat150](https://forum.inductiveautomation.com/u/diat150)\
**Post date:** [March 19, 2013, 4:33pm UTC](https://forum.inductiveautomation.com/t/mobile-module-vnc-option-doesnt-recognize-mouse-scrolling/6048/5 "2013-03-19T16:33:38Z")

</div>

thank. it would make my day if you can get it to work. 😃