# Mobile Numeric Entry

**URL:** <https://forum.inductiveautomation.com/t/mobile-numeric-entry/9006>\
**Category:** Ignition\
**Created:** [September 4, 2014, 11:34pm UTC](https://forum.inductiveautomation.com/t/mobile-numeric-entry/9006 "2014-09-04T23:34:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tjcorbin](https://avatars.discourse-cdn.com/v4/letter/t/45deac/32.png) [@tjcorbin](https://forum.inductiveautomation.com/u/tjcorbin)\
**Post date:** [September 4, 2014, 11:34pm UTC](https://forum.inductiveautomation.com/t/mobile-numeric-entry/9006/1 "2014-09-04T23:34:01Z")

</div>

Hi,

I have an issue with numeric entry using the mobile module. When I touch the numeric field the numeric keypad opens, I enter a value and press ‘close’.

The keypad them simple goes really small, and I need to try and press the tiny bottom right close button to get rid of it.

Please see image1 of keypad, and then image2 of keypad after pressing close.

Also - I note that the ‘battery’ bar of the iPhone is blank but still takes space at the top of the screen, anything I can do, at least it would be good to still see the signal strength, battery level etc.

Thanks

Tim

 ![](https://us1.discourse-cdn.com/inductiveautomation/original/2X/0/0e0ab1010e0d2f7ade736fd0156b1892735532ac.png)  
  
 ![](https://us1.discourse-cdn.com/inductiveautomation/original/2X/3/3b1b41e99c02e73caf45627ec2ee6a8808fb23d7.png)

---

<div class="post-metadata">

**Author:** ![AJBerera](https://avatars.discourse-cdn.com/v4/letter/a/9fc29f/32.png) [@AJBerera](https://forum.inductiveautomation.com/u/AJBerera)\
**Post date:** [May 25, 2019, 12:29am UTC](https://forum.inductiveautomation.com/t/mobile-numeric-entry/9006/2 "2019-05-25T00:29:07Z")

</div>

Same problem here