# Modbus Address Uint32 type **URL:** \ **Category:** Ignition\ **Tags:** ignition81\ **Created:** [November 1, 2022, 6:41am UTC](https://forum.inductiveautomation.com/t/modbus-address-uint32-type/65919 "2022-11-01T06:41:58Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Pofer\_Wang](https://avatars.discourse-cdn.com/v4/letter/p/f4b2a3/32.png) [@Pofer\_Wang](https://forum.inductiveautomation.com/u/Pofer_Wang)\ **Post date:** [November 1, 2022, 6:41am UTC](https://forum.inductiveautomation.com/t/modbus-address-uint32-type/65919/1 "2022-11-01T06:41:58Z")
hello everyone, I have modbus TCP equipment, it tag's address is holding register is 16000~16001. I want manually create an address for a single tag. but I study ignition modbus addressing manual. [https://docs.inductiveautomation.com/display/DOC81/Modbus+Addressing](https://docs.inductiveautomation.com/display/DOC81/Modbus+Addressing) Can't find the way. it only have 16bit and 2 consective 32bit. have someone can do it? ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [November 1, 2022, 11:38am UTC](https://forum.inductiveautomation.com/t/modbus-address-uint32-type/65919/2 "2022-11-01T11:38:55Z")
It will be `[someDevice]HRUI16000`, which will read and combine the two registers. Modbus supports 32-bit values by combining adjacent 16-bit holding registers. ---
**Author:** ![Pofer\_Wang](https://avatars.discourse-cdn.com/v4/letter/p/f4b2a3/32.png) [@Pofer\_Wang](https://forum.inductiveautomation.com/u/Pofer_Wang)\ **Post date:** [November 1, 2022, 12:46pm UTC](https://forum.inductiveautomation.com/t/modbus-address-uint32-type/65919/3 "2022-11-01T12:46:52Z")
ohh~ I asked a stupid question. thx...