# Modbus addresses for DEIF MIC-2 MK II

**URL:** <https://forum.inductiveautomation.com/t/modbus-addresses-for-deif-mic-2-mk-ii/82351>\
**Category:** General Discussion\
**Created:** [November 25, 2023, 6:47pm UTC](https://forum.inductiveautomation.com/t/modbus-addresses-for-deif-mic-2-mk-ii/82351 "2023-11-25T18:47:28Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![cthn](https://avatars.discourse-cdn.com/v4/letter/c/e19adc/32.png) [@cthn](https://forum.inductiveautomation.com/u/cthn)\
**Post date:** [November 25, 2023, 6:47pm UTC](https://forum.inductiveautomation.com/t/modbus-addresses-for-deif-mic-2-mk-ii/82351/1 "2023-11-25T18:47:28Z")

</div>

Hello,  
I have to communicate with a DEIF MIC-2 MK II via Modbus communication, but I didn't find in any documentation a table that lists for each measurement data its address, so I'm looking for it

---

<div class="post-metadata">

**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\
**Post date:** [November 25, 2023, 9:35pm UTC](https://forum.inductiveautomation.com/t/modbus-addresses-for-deif-mic-2-mk-ii/82351/2 "2023-11-25T21:35:16Z")

</div>

> [@cthn](#):
>
> DEIF MIC-2 MK II

> **[Modbus Communication Manual - Deif](https://www.yumpu.com/en/document/read/2340178/modbus-communication-manual-deif)**
>
> Modbus Communication Manual - Read more about integer, unsigned, value, power, register and modbus.

---

<div class="post-metadata">

**Author:** ![cthn](https://avatars.discourse-cdn.com/v4/letter/c/e19adc/32.png) [@cthn](https://forum.inductiveautomation.com/u/cthn)\
**Post date:** [November 25, 2023, 9:41pm UTC](https://forum.inductiveautomation.com/t/modbus-addresses-for-deif-mic-2-mk-ii/82351/3 "2023-11-25T21:41:10Z")

</div>

This is for the MIB 7000C, does the MIC-2 use the same Modbus addresses ?

---

<div class="post-metadata">

**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\
**Post date:** [November 25, 2023, 9:44pm UTC](https://forum.inductiveautomation.com/t/modbus-addresses-for-deif-mic-2-mk-ii/82351/4 "2023-11-25T21:44:55Z")

</div>

No idea, never used that brand. Worked with a lot of power meters though, and generally yes they have similar registers across different models.