# Modify a UDT alarm configuration using a Python script?

**URL:** <https://forum.inductiveautomation.com/t/modify-a-udt-alarm-configuration-using-a-python-script/21093>\
**Category:** Ignition\
**Created:** [November 27, 2018, 8:24pm UTC](https://forum.inductiveautomation.com/t/modify-a-udt-alarm-configuration-using-a-python-script/21093 "2018-11-27T20:24:24Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![poduzov](https://avatars.discourse-cdn.com/v4/letter/p/e9c0ed/32.png) [@poduzov](https://forum.inductiveautomation.com/u/poduzov)\
**Post date:** [November 27, 2018, 8:24pm UTC](https://forum.inductiveautomation.com/t/modify-a-udt-alarm-configuration-using-a-python-script/21093/1 "2018-11-27T20:24:24Z")

</div>

There is a Python function which modifies tags’ alarm configuration.  
**system.tag.editAlarmConfig(tagPaths, alarmConfig)**

It works fine on regular tags instances. Is it possible to modify UDT alarm configuration using a Python script? I can’t figure out how to get full tag path within a UDT.