# Modify Designer Splash Screen

**URL:** <https://forum.inductiveautomation.com/t/modify-designer-splash-screen/34913>\
**Category:** Ignition\
**Created:** [May 20, 2020, 4:36pm UTC](https://forum.inductiveautomation.com/t/modify-designer-splash-screen/34913 "2020-05-20T16:36:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dadof3and3](https://avatars.discourse-cdn.com/v4/letter/d/e5b9ba/32.png) [@dadof3and3](https://forum.inductiveautomation.com/u/dadof3and3)\
**Post date:** [May 20, 2020, 4:36pm UTC](https://forum.inductiveautomation.com/t/modify-designer-splash-screen/34913/1 "2020-05-20T16:36:28Z")

</div>

I would like to augment the Ignition Designer splash screen, add gateway information to where it’s attached. Any ideas ??

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [May 20, 2020, 4:48pm UTC](https://forum.inductiveautomation.com/t/modify-designer-splash-screen/34913/2 "2020-05-20T16:48:37Z")

</div>

This is not something you can augment.

In newer versions some information about the gateway you’re connected to has been added:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/2X/7/79e18cf123702fc39ab04baedfb87de2a6d084c5.jpeg)