# More issues with Emulate connectivity

**URL:** <https://forum.inductiveautomation.com/t/more-issues-with-emulate-connectivity/48547>\
**Category:** Ignition\
**Created:** [July 6, 2021, 7:23pm UTC](https://forum.inductiveautomation.com/t/more-issues-with-emulate-connectivity/48547 "2021-07-06T19:23:47Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 11, 2021, 3:44pm UTC](https://forum.inductiveautomation.com/t/more-issues-with-emulate-connectivity/48547/21 "2021-10-11T15:44:34Z")

</div>

No official recommendation. Last time I looked the emulated PLCs did not support EtherNet/IP connections and you had to use the COM module to make an OPC Classic connection to Linx.

It seems that things have changed a little since then but it’s not something we’ve looked into at all here.

---

<div class="post-metadata">

**Author:** ![pdixon](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pdixon/32/6899_2.png) [@pdixon](https://forum.inductiveautomation.com/u/pdixon)\
**Post date:** [October 11, 2021, 3:52pm UTC](https://forum.inductiveautomation.com/t/more-issues-with-emulate-connectivity/48547/22 "2021-10-11T15:52:00Z")

</div>

When I try the OPC connection, it still won’t connect even though I can browse all tags

 ![ig_emulate_sheettest_2021-10-11 at 10.49.17 AM](https://us1.discourse-cdn.com/inductiveautomation/original/3X/9/f/9f5706145689b11e93fca5cc83b96918f183ae53.jpeg)

[Previous page](https://forum.inductiveautomation.com/t/more-issues-with-emulate-connectivity/48547.md?page=1)
