# More issues with Emulate connectivity

**URL:** <https://forum.inductiveautomation.com/t/more-issues-with-emulate-connectivity/48547>\
**Category:** Ignition\
**Created:** [July 6, 2021, 7:23pm UTC](https://forum.inductiveautomation.com/t/more-issues-with-emulate-connectivity/48547 "2021-07-06T19:23:47Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [July 8, 2021, 10:54pm UTC](https://forum.inductiveautomation.com/t/more-issues-with-emulate-connectivity/48547/7 "2021-07-08T22:54:18Z")

</div>

You can also dump your Logix project into my Ethernet/IP module if you don't need emulation of the ladder logic.

> [@AB PLC tag import/export](http://forum.inductiveautomation.com/t/ab-plc-tag-import-export/33050/4):
>
> Start in your gateway’s configuration section, under the OPC Server’s “Device Connections” and click on “Create new Device…”: Select the Ethernet/IP Class1 Host Device: Give it a name and serial number… … and a slot number and listening address (required for external access) then “Create”: Then, in the list of devices, pick the new device’s “More” button, and select “Co…

---

_[View the full topic](https://forum.inductiveautomation.com/t/more-issues-with-emulate-connectivity/48547)._