# MQTT Edge - ABB TotalFlow Module **URL:** \ **Category:** Ignition\ **Tags:** ignition80\ **Created:** [March 31, 2020, 5:51pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559 "2020-03-31T17:51:06Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Matthew.gaitan](https://avatars.discourse-cdn.com/v4/letter/m/59ef9b/32.png) [@Matthew.gaitan](https://forum.inductiveautomation.com/u/Matthew.gaitan)\ **Post date:** [March 31, 2020, 5:51pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/1 "2020-03-31T17:51:06Z")
After viewing the webinar today I was poking around the Ignition Edge documentation and on the Edge IIoT page ([Edge IIoT - Ignition User Manual 8.0 - Ignition Documentation](https://docs.inductiveautomation.com/display/DOC80/Edge+IIoT)) I noticed this little snippit: > Edge IIoT activates the following modules: > > - MQTT Transmission > - Opto22 SNAP PAC driver > - Emerson ROC driver > - **ABB TotalFlow** Is this module actually released? I cannot find any more information on it, let alone a download link ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [March 31, 2020, 6:00pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/2 "2020-03-31T18:00:00Z")
@wes0johnson ---
**Author:** ![wes0johnson](https://avatars.discourse-cdn.com/v4/letter/w/7ab992/32.png) [@wes0johnson](https://forum.inductiveautomation.com/u/wes0johnson)\ **Post date:** [March 31, 2020, 9:11pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/3 "2020-03-31T21:11:46Z")
We’re working on it and getting close. We should have a beta available within the next couple of months. ---
**Author:** ![Matthew.gaitan](https://avatars.discourse-cdn.com/v4/letter/m/59ef9b/32.png) [@Matthew.gaitan](https://forum.inductiveautomation.com/u/Matthew.gaitan)\ **Post date:** [March 31, 2020, 9:17pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/4 "2020-03-31T21:17:19Z")
Awesome! Happy to hear that. We’re eagerly looking forward to it. Do you know if this would be an Edge only module, or if it would be able to be applied to a normal Ignition installation? ---
**Author:** ![wes0johnson](https://avatars.discourse-cdn.com/v4/letter/w/7ab992/32.png) [@wes0johnson](https://forum.inductiveautomation.com/u/wes0johnson)\ **Post date:** [April 8, 2020, 12:05am UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/5 "2020-04-08T00:05:06Z")
It’ll work for Edge and standard Ignition installations. ---
**Author:** ![michael.tabor](https://avatars.discourse-cdn.com/v4/letter/m/e5b9ba/32.png) [@michael.tabor](https://forum.inductiveautomation.com/u/michael.tabor)\ **Post date:** [July 14, 2020, 7:07pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/6 "2020-07-14T19:07:53Z")
Is the ABB module available yet? ---
**Author:** ![wes0johnson](https://avatars.discourse-cdn.com/v4/letter/w/7ab992/32.png) [@wes0johnson](https://forum.inductiveautomation.com/u/wes0johnson)\ **Post date:** [July 14, 2020, 8:08pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/7 "2020-07-14T20:08:15Z")
Not quite but we’re getting close. Hopefully in a couple of weeks the beta will be available. ---
**Author:** ![diat150](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@diat150](https://forum.inductiveautomation.com/u/diat150)\ **Post date:** [July 15, 2020, 7:10pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/8 "2020-07-15T19:10:31Z")
I am assuming this is something that will only work with G5? ---
**Author:** ![wes0johnson](https://avatars.discourse-cdn.com/v4/letter/w/7ab992/32.png) [@wes0johnson](https://forum.inductiveautomation.com/u/wes0johnson)\ **Post date:** [July 15, 2020, 7:23pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/9 "2020-07-15T19:23:16Z")
It should work with G2 late, G3, G4, and G5. We haven’t tested against all hardware versions yet but the protocol implementation should support these four variants. ---
**Author:** ![diat150](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@diat150](https://forum.inductiveautomation.com/u/diat150)\ **Post date:** [July 15, 2020, 11:05pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/10 "2020-07-15T23:05:36Z")
ah ok, I am assuming that the module will have to be run on some type of hardware at the location of the totalflow. I was more or less wondering if the G5 would support mqtt natively but it doesnt appear that way yet. ---
**Author:** ![Matthew.gaitan](https://avatars.discourse-cdn.com/v4/letter/m/59ef9b/32.png) [@Matthew.gaitan](https://forum.inductiveautomation.com/u/Matthew.gaitan)\ **Post date:** [August 11, 2020, 4:45pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/11 "2020-08-11T16:45:30Z")
@wes0johnson I see that the module beta has been released! Any info on pricing? Do you know if it’s going to be a one time payment or is it a yearly / per device fee? Thank you ---
**Author:** ![wes0johnson](https://avatars.discourse-cdn.com/v4/letter/w/7ab992/32.png) [@wes0johnson](https://forum.inductiveautomation.com/u/wes0johnson)\ **Post date:** [August 11, 2020, 6:20pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/12 "2020-08-11T18:20:36Z")
Please contact [sales@cirrus-link.com](mailto:sales@cirrus-link.com). They’ll be able to answer these questions. But, I believe it is sold just like any other third party module for a fixed cost with an optional annual support contract. ---
**Author:** ![Matthew.gaitan](https://avatars.discourse-cdn.com/v4/letter/m/59ef9b/32.png) [@Matthew.gaitan](https://forum.inductiveautomation.com/u/Matthew.gaitan)\ **Post date:** [August 11, 2020, 6:35pm UTC](https://forum.inductiveautomation.com/t/mqtt-edge-abb-totalflow-module/33559/13 "2020-08-11T18:35:34Z")
Will do, Thank you Wes