# MQTT transmission server connection won't try to connect **URL:** \ **Category:** Ignition\ **Created:** [April 30, 2023, 6:29pm UTC](https://forum.inductiveautomation.com/t/mqtt-transmission-server-connection-wont-try-to-connect/73060 "2023-04-30T18:29:20Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![jacob.ramirez](https://avatars.discourse-cdn.com/v4/letter/j/9dc877/32.png) [@jacob.ramirez](https://forum.inductiveautomation.com/u/jacob.ramirez)\ **Post date:** [April 30, 2023, 6:29pm UTC](https://forum.inductiveautomation.com/t/mqtt-transmission-server-connection-wont-try-to-connect/73060/1 "2023-04-30T18:29:20Z")
I have an Ignition Edge system and the server connection wont connect. It stays at 0 of 0. Even though I have a connection defined. Does anyone have any ideas as to why its doing that? ---
**Author:** ![Kevin.Collins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.collins/32/13497_2.png) [@Kevin.Collins](https://forum.inductiveautomation.com/u/Kevin.Collins)\ **Post date:** [April 30, 2023, 9:46pm UTC](https://forum.inductiveautomation.com/t/mqtt-transmission-server-connection-wont-try-to-connect/73060/2 "2023-04-30T21:46:10Z")
First stop would be the logs.. Second would be possibly to check to make sure that you have a Transmitter assigned to the Server Set that is targeting your Connection? ---
**Author:** ![jacob.ramirez](https://avatars.discourse-cdn.com/v4/letter/j/9dc877/32.png) [@jacob.ramirez](https://forum.inductiveautomation.com/u/jacob.ramirez)\ **Post date:** [April 30, 2023, 11:20pm UTC](https://forum.inductiveautomation.com/t/mqtt-transmission-server-connection-wont-try-to-connect/73060/3 "2023-04-30T23:20:55Z")
Nothing glaring in the logs and yes a server set is assigned to the transmitter. I disabled and enabled the transmitter and not its connected. Not sure why that worked but it did. Thank you for the help.