# Multi client on the same monitor

**URL:** <https://forum.inductiveautomation.com/t/multi-client-on-the-same-monitor/16909>\
**Category:** Ignition\
**Created:** [February 7, 2018, 3:40pm UTC](https://forum.inductiveautomation.com/t/multi-client-on-the-same-monitor/16909 "2018-02-07T15:40:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![pandazz](https://avatars.discourse-cdn.com/v4/letter/p/41988e/32.png) [@pandazz](https://forum.inductiveautomation.com/u/pandazz)\
**Post date:** [February 7, 2018, 3:40pm UTC](https://forum.inductiveautomation.com/t/multi-client-on-the-same-monitor/16909/1 "2018-02-07T15:40:16Z")

</div>

Hi everybody,

Basing on what I read in the forum and also in the manual, in Ignition I can sure launch multi client on multi monitor, because there is the function “system.gui.getScreens()” that allow me to index each screen and handle this stuff.

What I am asking now is: it’s possible to split a videowall (with 4k of resolution) in four parts and visualize a different client of Ignition in each parts?  
Because if I try to do this with a matrox C680 card, the matrox software allow me to split the monitor of course, but Ignition never consider each splitted parts like a different monitor from each other.

Also in this condition, if I run the “system.gui.getScreens()”, I receive only one screen recognized by Ignition into the Dataset returned by the function.

Thank you for your attention.