# Multi-Monitor Designer/Vision Support **URL:** \ **Category:** Ignition\ **Created:** [December 31, 2014, 11:31pm UTC](https://forum.inductiveautomation.com/t/multi-monitor-designer-vision-support/9501 "2014-12-31T23:31:05Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![Fellowbak](https://avatars.discourse-cdn.com/v4/letter/f/8797f3/32.png) [@Fellowbak](https://forum.inductiveautomation.com/u/Fellowbak)\ **Post date:** [August 15, 2022, 7:00am UTC](https://forum.inductiveautomation.com/t/multi-monitor-designer-vision-support/9501/4 "2022-08-15T07:00:47Z")
> [@Paullys50](#): > > So if you are using security and you need to log on, well you have 3 instances you have to log onto. Now, you can mitigate this with some basic system message scripting but it’s not obvious. I’ve had some support on this from members of the forum so be sure to ask if you get to that point. Hi Paullys50. I know this is an old post, but I'm exactly at this point in my project. Could you explain how this would work or point me in the right direction? That would be very much appreciated. I've created a post for the issue. Feel free to answer there, so we don't spam this one. > [@Login on multiple clients on the same computer at once](https://forum.inductiveautomation.com/t/login-on-multiple-clients-on-the-same-computer-at-once/62911): > > Hi forum. I have a setup in a control room with one computer connected to multiple monitors. Each monitor has its own client running with the same project. I’ve made a .bat file for opening all the clients at once. I need to have a login for the clients so I have to login on all the clients separately. Ideally I’d like to only write the login credentials once. Has anybody figured out a solution for this? --- _[View the full topic](https://forum.inductiveautomation.com/t/multi-monitor-designer-vision-support/9501)._