# Multiple navigation Top and Left overlap - Vision **URL:** \ **Category:** Ignition\ **Tags:** vision\ **Created:** [April 12, 2023, 4:49pm UTC](https://forum.inductiveautomation.com/t/multiple-navigation-top-and-left-overlap-vision/72368 "2023-04-12T16:49:37Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![rfolkes](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@rfolkes](https://forum.inductiveautomation.com/u/rfolkes)\ **Post date:** [April 12, 2023, 4:49pm UTC](https://forum.inductiveautomation.com/t/multiple-navigation-top-and-left-overlap-vision/72368/1 "2023-04-12T16:49:37Z")
![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/7/e7372cc3aa95cadc5665618f2696c526776d5366.png) Have 2 docked navigation windows. The Left window will only display during specific times while the top navigation is always present. How do I stop the left docked window from going under the top navigation or extending to dead space at top of left navigation if screen size is expanded? I want the top left of the Left navigation to be anchored to the bottom left of the top navigation. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 12, 2023, 4:57pm UTC](https://forum.inductiveautomation.com/t/multiple-navigation-top-and-left-overlap-vision/72368/2 "2023-04-12T16:57:26Z")
Check your docking axis precedence and the overlap controls in your project settings under [Vision =\> User Interface](https://docs.inductiveautomation.com/display/DOC81/Vision+Project+Properties#VisionProjectProperties-VisionUserInterfaceProperties). ---
**Author:** ![rfolkes](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@rfolkes](https://forum.inductiveautomation.com/u/rfolkes)\ **Post date:** [April 12, 2023, 5:00pm UTC](https://forum.inductiveautomation.com/t/multiple-navigation-top-and-left-overlap-vision/72368/3 "2023-04-12T17:00:26Z")
![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/d/3/d3ef4e20b18fa0710bbfe79e429a655821f8a549.png) ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 12, 2023, 5:15pm UTC](https://forum.inductiveautomation.com/t/multiple-navigation-top-and-left-overlap-vision/72368/4 "2023-04-12T17:15:56Z")
Did you configure different layer numbers for any of these windows? ---
**Author:** ![rfolkes](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@rfolkes](https://forum.inductiveautomation.com/u/rfolkes)\ **Post date:** [April 12, 2023, 5:54pm UTC](https://forum.inductiveautomation.com/t/multiple-navigation-top-and-left-overlap-vision/72368/5 "2023-04-12T17:54:45Z")
I have tried with both having higher/lower/same Layer/dock index and doesn't seem to make a difference ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 12, 2023, 6:04pm UTC](https://forum.inductiveautomation.com/t/multiple-navigation-top-and-left-overlap-vision/72368/6 "2023-04-12T18:04:57Z")
Probably time to get support involved. ---
**Author:** ![rfolkes](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@rfolkes](https://forum.inductiveautomation.com/u/rfolkes)\ **Post date:** [May 3, 2023, 2:48pm UTC](https://forum.inductiveautomation.com/t/multiple-navigation-top-and-left-overlap-vision/72368/7 "2023-05-03T14:48:51Z")
Solution was to adjust the Layout Constraints on the component (tab strip) ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/2/2241411d734abea4443c85c70d7857f863f2818b.png)