# Native Client Launcher 7.8

**URL:** <https://forum.inductiveautomation.com/t/native-client-launcher-7-8/36697>\
**Category:** Ignition\
**Created:** [July 14, 2020, 7:47pm UTC](https://forum.inductiveautomation.com/t/native-client-launcher-7-8/36697 "2020-07-14T19:47:38Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![steven.rehnborg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/steven.rehnborg/32/4952_2.png) [@steven.rehnborg](https://forum.inductiveautomation.com/u/steven.rehnborg)\
**Post date:** [July 14, 2020, 7:47pm UTC](https://forum.inductiveautomation.com/t/native-client-launcher-7-8/36697/1 "2020-07-14T19:47:38Z")

</div>

I am reading a lot in the forum about using the Native Client Launcher especially to run client in linux, which I am trying to do. I am stuck on version Ignition 7.8 and I do not see that choice on my Ignition Home page. Was it not available for 7.8? Is it an add-on from the standard license? Do I need to install it? I’m at a loss since I don’t see anyone else having this problem in the forum.

---

<div class="post-metadata">

**Author:** ![bpreston](https://avatars.discourse-cdn.com/v4/letter/b/4af34b/32.png) [@bpreston](https://forum.inductiveautomation.com/u/bpreston)\
**Post date:** [July 14, 2020, 7:53pm UTC](https://forum.inductiveautomation.com/t/native-client-launcher-7-8/36697/2 "2020-07-14T19:53:35Z")

</div>

Its shown in the [manual](https://docs.inductiveautomation.com/display/DOC/Using+the+Native+Client+Launchers) for 7.8 so I would assume it should be there. It looks like the link on the [webpage](https://docs.inductiveautomation.com/display/DOC/Customizing+Gateway+Homepage) can be turned off. You may just need to turn it back on.

---

<div class="post-metadata">

**Author:** ![dkhayes117](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dkhayes117/32/68344_2.png) [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\
**Post date:** [July 14, 2020, 7:53pm UTC](https://forum.inductiveautomation.com/t/native-client-launcher-7-8/36697/3 "2020-07-14T19:53:45Z")

</div>

try going to the configure page-\>Gateway Settings-\>Homepage Config. In 7.9, you can hide the native launcher option

---

<div class="post-metadata">

**Author:** ![steven.rehnborg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/steven.rehnborg/32/4952_2.png) [@steven.rehnborg](https://forum.inductiveautomation.com/u/steven.rehnborg)\
**Post date:** [July 14, 2020, 7:57pm UTC](https://forum.inductiveautomation.com/t/native-client-launcher-7-8/36697/4 "2020-07-14T19:57:50Z")

</div>

Thanks. I’ve never been to that section before. It was in there.