# Navigation Tab Strip help

**URL:** <https://forum.inductiveautomation.com/t/navigation-tab-strip-help/11506>\
**Category:** Ignition\
**Created:** [April 14, 2016, 4:29pm UTC](https://forum.inductiveautomation.com/t/navigation-tab-strip-help/11506 "2016-04-14T16:29:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sudhamoorthy](https://avatars.discourse-cdn.com/v4/letter/s/c5a1d2/32.png) [@sudhamoorthy](https://forum.inductiveautomation.com/u/sudhamoorthy)\
**Post date:** [April 14, 2016, 4:29pm UTC](https://forum.inductiveautomation.com/t/navigation-tab-strip-help/11506/1 "2016-04-14T16:29:01Z")

</div>

Hi,

I have used navigation tab strip in my project for navigating windows.

If a window is opened, and if i again open another window, the old window doesn’t go off and it still stays. check the screenshot below.

[attachment=0]navigation.png[/attachment]

Pls help me in resolving this issue.

---

<div class="post-metadata">

**Author:** ![sudhamoorthy](https://avatars.discourse-cdn.com/v4/letter/s/c5a1d2/32.png) [@sudhamoorthy](https://forum.inductiveautomation.com/u/sudhamoorthy)\
**Post date:** [April 15, 2016, 3:42pm UTC](https://forum.inductiveautomation.com/t/navigation-tab-strip-help/11506/2 "2016-04-15T15:42:49Z")

</div>

This problem has been resolved.