# Need suggestions - Torque Wrenches to Ignition - MQTT

**URL:** <https://forum.inductiveautomation.com/t/need-suggestions-torque-wrenches-to-ignition-mqtt/86522>\
**Category:** General Discussion\
**Created:** [February 28, 2024, 4:07pm UTC](https://forum.inductiveautomation.com/t/need-suggestions-torque-wrenches-to-ignition-mqtt/86522 "2024-02-28T16:07:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eagel007](https://avatars.discourse-cdn.com/v4/letter/e/7bcc69/32.png) [@Eagel007](https://forum.inductiveautomation.com/u/Eagel007)\
**Post date:** [February 28, 2024, 4:07pm UTC](https://forum.inductiveautomation.com/t/need-suggestions-torque-wrenches-to-ignition-mqtt/86522/1 "2024-02-28T16:07:06Z")

</div>

Hi,

We use MQTT protocol and need to integrate Torque wrenches with Ignition. Basically depending upon what step is being performed, the wrench should get configured automatically to desired N m.

The whole idea is to not let operators select torque settings but automatically feed based on step they are performing. Would you recommend any specific company and also how to achieve this?

Please help!

Thanks

---

<div class="post-metadata">

**Author:** ![louagejasper](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/louagejasper/32/86311_2.png) [@louagejasper](https://forum.inductiveautomation.com/u/louagejasper)\
**Post date:** [February 29, 2024, 7:32am UTC](https://forum.inductiveautomation.com/t/need-suggestions-torque-wrenches-to-ignition-mqtt/86522/2 "2024-02-29T07:32:01Z")

</div>

Doing something as crucial as setting the torque over MQTT, I would definitely suggest to use SparkplugB to write the commands.