# Need to develop Module for IEC-60870-104 and ICCP (Tase.2)

**URL:** <https://forum.inductiveautomation.com/t/need-to-develop-module-for-iec-60870-104-and-iccp-tase-2/27027>\
**Category:** Module Development\
**Created:** [July 31, 2019, 12:22am UTC](https://forum.inductiveautomation.com/t/need-to-develop-module-for-iec-60870-104-and-iccp-tase-2/27027 "2019-07-31T00:22:15Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![kkomara](https://avatars.discourse-cdn.com/v4/letter/k/c89c15/32.png) [@kkomara](https://forum.inductiveautomation.com/u/kkomara)\
**Post date:** [July 31, 2019, 12:22am UTC](https://forum.inductiveautomation.com/t/need-to-develop-module-for-iec-60870-104-and-iccp-tase-2/27027/1 "2019-07-31T00:22:15Z")

</div>

Anyone have modules developed for these 2 Utility/Electric Grid protocols ??? Libraries for IEC-60870-104 are available through Triangle Microworks, and libraries for ICCP are available from SISCO (not Cisco).

Looking to use Ignition for Utility/Grid Scale SCADA and need these 2 protocols “under the Ignition hood” if possible !

---

<div class="post-metadata">

**Author:** ![nader.chinichian](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nader.chinichian/32/9261_2.png) [@nader.chinichian](https://forum.inductiveautomation.com/u/nader.chinichian)\
**Post date:** [July 31, 2019, 7:31am UTC](https://forum.inductiveautomation.com/t/need-to-develop-module-for-iec-60870-104-and-iccp-tase-2/27027/2 "2019-07-31T07:31:40Z")

</div>

> [@kkomara](#):
>
> protocols

Why don't you use SCADA gateway OPC DA server from Triangle Microworks or Kepware?  
Kepware also provide OPC UA interface to ignition. I prefer Kepware IEC 60870-5-104 better than Triangle Microworks.

---

<div class="post-metadata">

**Author:** ![Peter\_NL](https://avatars.discourse-cdn.com/v4/letter/p/d9b06d/32.png) [@Peter\_NL](https://forum.inductiveautomation.com/u/Peter_NL)\
**Post date:** [May 13, 2024, 5:51pm UTC](https://forum.inductiveautomation.com/t/need-to-develop-module-for-iec-60870-104-and-iccp-tase-2/27027/3 "2024-05-13T17:51:06Z")

</div>

To my knowledge, Kepware doesn't provide ICCP support.

---

<div class="post-metadata">

**Author:** ![Peter\_NL](https://avatars.discourse-cdn.com/v4/letter/p/d9b06d/32.png) [@Peter\_NL](https://forum.inductiveautomation.com/u/Peter_NL)\
**Post date:** [May 13, 2024, 5:53pm UTC](https://forum.inductiveautomation.com/t/need-to-develop-module-for-iec-60870-104-and-iccp-tase-2/27027/4 "2024-05-13T17:53:11Z")

</div>

I recognize the need for both 104 and ICCP. What solution did you use of can you suggest that provide support for both? I think Triangle Microworks SCADA data gateway as suggested by @nader.chinichian support both but are there other options?

---

<div class="post-metadata">

**Author:** ![nader.chinichian](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nader.chinichian/32/9261_2.png) [@nader.chinichian](https://forum.inductiveautomation.com/u/nader.chinichian)\
**Post date:** [May 13, 2024, 8:02pm UTC](https://forum.inductiveautomation.com/t/need-to-develop-module-for-iec-60870-104-and-iccp-tase-2/27027/5 "2024-05-13T20:02:34Z")

</div>

> [@Peter\_NL](#):
>
> Triangle Microworks

They support both but I recommend using kepware much easier to use but for ICCP Triangle Microworks is only good solution out there.  
Even IA use Triangle Microworks drivers for IEC61850. They are best.

---

<div class="post-metadata">

**Author:** ![Peter\_NL](https://avatars.discourse-cdn.com/v4/letter/p/d9b06d/32.png) [@Peter\_NL](https://forum.inductiveautomation.com/u/Peter_NL)\
**Post date:** [May 14, 2024, 8:41am UTC](https://forum.inductiveautomation.com/t/need-to-develop-module-for-iec-60870-104-and-iccp-tase-2/27027/6 "2024-05-14T08:41:38Z")

</div>

It is always balance between multiple products best of breed or one solution that covers all needed functionality. First option is in most cases more costly and complex to manage.