# Need to pull DINT and RESET from Micro820

**URL:** <https://forum.inductiveautomation.com/t/need-to-pull-dint-and-reset-from-micro820/48073>\
**Category:** Ignition\
**Created:** [June 22, 2021, 5:51pm UTC](https://forum.inductiveautomation.com/t/need-to-pull-dint-and-reset-from-micro820/48073 "2021-06-22T17:51:46Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![dkhayes117](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dkhayes117/32/68344_2.png) [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\
**Post date:** [June 22, 2021, 7:24pm UTC](https://forum.inductiveautomation.com/t/need-to-pull-dint-and-reset-from-micro820/48073/5 "2021-06-22T19:24:02Z")

</div>

Its been a while since I messed with my micro850, but I think I configured the modbus address in CCW, then added the PLC as a device on the gateway webpage. Then the OPC Item Path should just be `[DeviceNameHere]modbusMapping`, for example `[WeimaWoodchipper]C2`  
[Modbus Addressing AB Micro850 - Ignition - Inductive Automation Forum](http://forum.inductiveautomation.com/t/modbus-addressing-ab-micro850/19070)

---

_[View the full topic](https://forum.inductiveautomation.com/t/need-to-pull-dint-and-reset-from-micro820/48073)._