# New Alarm Summary **URL:** \ **Category:** Ignition\ **Created:** [April 19, 2013, 5:12pm UTC](https://forum.inductiveautomation.com/t/new-alarm-summary/6282 "2013-04-19T17:12:41Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![allenr8](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@allenr8](https://forum.inductiveautomation.com/u/allenr8)\ **Post date:** [April 19, 2013, 5:12pm UTC](https://forum.inductiveautomation.com/t/new-alarm-summary/6282/1 "2013-04-19T17:12:41Z")
So just a few questions on the new alarm summary object: 1. Can I specify which columns are displayed and the widths? I can’t find anything on it like the old one used to have. 2. What does the Path filter do? I thought it took a tag path and filtered that way, but I break it every time I try to use it. If I have several alarms under a folder like this: Site1/Place/ what would I put in the Path filter to make it work? I have used the display path with good success, but would like to do it by folder if possible. Thanks! ---
**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\ **Post date:** [April 23, 2013, 5:38pm UTC](https://forum.inductiveautomation.com/t/new-alarm-summary/6282/2 "2013-04-23T17:38:55Z")
As for column widths and which are displayed: simply right click on the table’s header in preview mode to choose what’s displayed, and adjust them to their desired width. For your second question, we’ll get back to you shortly. ---
**Author:** ![allenr8](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@allenr8](https://forum.inductiveautomation.com/u/allenr8)\ **Post date:** [May 2, 2013, 5:21pm UTC](https://forum.inductiveautomation.com/t/new-alarm-summary/6282/3 "2013-05-02T17:21:02Z")
Any response on the second question yet? ---
**Author:** ![onestank](https://avatars.discourse-cdn.com/v4/letter/o/ba9def/32.png) [@onestank](https://forum.inductiveautomation.com/u/onestank)\ **Post date:** [June 6, 2013, 4:48pm UTC](https://forum.inductiveautomation.com/t/new-alarm-summary/6282/4 "2013-06-06T16:48:45Z")
I am using the display path filter with something like _folder/_. Hope this helps. ---
**Author:** ![allenr8](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@allenr8](https://forum.inductiveautomation.com/u/allenr8)\ **Post date:** [June 14, 2013, 5:40pm UTC](https://forum.inductiveautomation.com/t/new-alarm-summary/6282/5 "2013-06-14T17:40:38Z")
That is what I was doing before and it would break. I’ll give it another go - anyway to have multiple folders listed? ---
**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\ **Post date:** [June 14, 2013, 6:59pm UTC](https://forum.inductiveautomation.com/t/new-alarm-summary/6282/6 "2013-06-14T18:59:27Z")
Both the display path filter and source filter can be a comma separated list, so you should be able to specify any number of folders to display. Regards, ---
**Author:** ![allenr8](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@allenr8](https://forum.inductiveautomation.com/u/allenr8)\ **Post date:** [June 14, 2013, 9:34pm UTC](https://forum.inductiveautomation.com/t/new-alarm-summary/6282/7 "2013-06-14T21:34:06Z")
Awesome, I will probably switch over to the display path now since it is more resource friendly. ---
**Author:** ![acarmona](https://avatars.discourse-cdn.com/v4/letter/a/6a8cbe/32.png) [@acarmona](https://forum.inductiveautomation.com/u/acarmona)\ **Post date:** [January 22, 2020, 8:52pm UTC](https://forum.inductiveautomation.com/t/new-alarm-summary/6282/8 "2020-01-22T20:52:35Z")
This is an old topic, but I want to have different source filters, how you do comma separate?, it gave me an error