# New DNP3 driver - Incoming mesages only

**URL:** <https://forum.inductiveautomation.com/t/new-dnp3-driver-incoming-mesages-only/84427>\
**Category:** Ignition\
**Tags:** ignition81\
**Created:** [January 18, 2024, 7:01am UTC](https://forum.inductiveautomation.com/t/new-dnp3-driver-incoming-mesages-only/84427 "2024-01-18T07:01:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chad\_van\_Breda](https://avatars.discourse-cdn.com/v4/letter/c/45deac/32.png) [@Chad\_van\_Breda](https://forum.inductiveautomation.com/u/Chad_van_Breda)\
**Post date:** [January 18, 2024, 7:01am UTC](https://forum.inductiveautomation.com/t/new-dnp3-driver-incoming-mesages-only/84427/1 "2024-01-18T07:01:53Z")

</div>

Hi. Does the new driver DNP3 driver support incoming messages only?

We have a low power data logger that sends periodic and unsolicited data and then goes back into a sleep mode.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [January 18, 2024, 1:21pm UTC](https://forum.inductiveautomation.com/t/new-dnp3-driver-incoming-mesages-only/84427/2 "2024-01-18T13:21:21Z")

</div>

In the spec this is referred to as "Dual Endpoint", aka "Reverse Connect".

It's not supported right now. We have loose plans to implement it some day in the future, after the DNP3 library we use gains support for it.