# NI OPC Server Fault - Bad\_OutOfMemory **URL:** \ **Category:** Ignition\ **Tags:** ignition81\ **Created:** [January 31, 2023, 9:15am UTC](https://forum.inductiveautomation.com/t/ni-opc-server-fault-bad-outofmemory/69200 "2023-01-31T09:15:28Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![prashant.pednekar](https://avatars.discourse-cdn.com/v4/letter/p/ed8c4c/32.png) [@prashant.pednekar](https://forum.inductiveautomation.com/u/prashant.pednekar)\ **Post date:** [January 31, 2023, 9:15am UTC](https://forum.inductiveautomation.com/t/ni-opc-server-fault-bad-outofmemory/69200/1 "2023-01-31T09:15:28Z")
Hello everyone, I am trying to connect NI LabView (V5.11.262.0) OPC UA Server 2013 (32-Bit OS) in Ignition 8.1.13 (64 bit). I have already set all the certificates to trusted (both in Ignition and NI LabView Configuration) and established a Client server communication successfully, But I still get an error while connecting to the OPC Server which says "status=Bad\_OutOfMemory, description=Not enough memory to complete the operation." I tried to recreate the certificate and remaking the OPC UA Server connection which failed. Does anybody know about this or have faced similar issue ? I will attach the screen of the error message popup. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/7/474ec5b0a7bc9cbf7c1073ddf510801a65d02186.png) ERROR MESSAGE IN DETAIL : UaServiceFaultException: status=Bad\_OutOfMemory, message=Not enough memory to complete the operation. at org.eclipse.milo.opcua.stack.client.UaStackClient.lambda$deliverResponse$5(UaStackClient.java:328) at org.eclipse.milo.opcua.stack.core.util.ExecutionQueue$Task.run(ExecutionQueue.java:119) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.base/java.lang.Thread.run(Unknown Source) 8.1.13 (b2021122109) Azul Systems, Inc. 11.0.13 Thanks. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [January 31, 2023, 1:01pm UTC](https://forum.inductiveautomation.com/t/ni-opc-server-fault-bad-outofmemory/69200/2 "2023-01-31T13:01:23Z")
Give Ignition more memory? (In `ignition.conf`.) ---
**Author:** ![prashant.pednekar](https://avatars.discourse-cdn.com/v4/letter/p/ed8c4c/32.png) [@prashant.pednekar](https://forum.inductiveautomation.com/u/prashant.pednekar)\ **Post date:** [January 31, 2023, 2:56pm UTC](https://forum.inductiveautomation.com/t/ni-opc-server-fault-bad-outofmemory/69200/3 "2023-01-31T14:56:40Z")
Sorry, I forgot to mention that ignition gateway is running on a good enough memory buffer I have allocated 6GB of which almost 2-3GB are free at any given point in time. Also would like to point out that the LabView computer is running on a 32bit OS (Windows 7) which has 4GB ram out of which only 50mb is available and Ignition is running on a different PC on a 64 Bit OS (Windows 11) which has 32gb ram. ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [January 31, 2023, 2:58pm UTC](https://forum.inductiveautomation.com/t/ni-opc-server-fault-bad-outofmemory/69200/4 "2023-01-31T14:58:37Z")
This is the NI server reporting OutOfMemory, not Ignition. Try restarting it or contacting their support. ---
**Author:** ![swolnisty](https://avatars.discourse-cdn.com/v4/letter/s/7bcc69/32.png) [@swolnisty](https://forum.inductiveautomation.com/u/swolnisty)\ **Post date:** [January 31, 2023, 8:11pm UTC](https://forum.inductiveautomation.com/t/ni-opc-server-fault-bad-outofmemory/69200/5 "2023-01-31T20:11:15Z")
@Kevin.Herron is right here, NI support is probably your best bet. I have had LabVIEW give me this error a few times before and it has almost always been related with an error in how I was trying to configure LabVIEW to interact with the host machine or another computer (e.g. having LabVIEW run a .bat file on the host machine). Luckily, NI's technical support staff is not the worst (not as good as Inductive's though 🙂 ). ---
**Author:** ![prashant.pednekar](https://avatars.discourse-cdn.com/v4/letter/p/ed8c4c/32.png) [@prashant.pednekar](https://forum.inductiveautomation.com/u/prashant.pednekar)\ **Post date:** [February 2, 2023, 6:24am UTC](https://forum.inductiveautomation.com/t/ni-opc-server-fault-bad-outofmemory/69200/6 "2023-02-02T06:24:09Z")
Thank you @Kevin.Herron for your quick response will contact NI Support and ask them for solution. @swolnisty thanks for sharing ur experience. 🙂 👍