# Nightly 8.3 Changelogs - 2026 and beyond **URL:** \ **Category:** Ignition Early Access\ **Created:** [December 29, 2025, 3:49pm UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010 "2025-12-29T15:49:04Z")\ **Posts on this page:** 20\ **Page:** 7
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [July 21, 2026, 6:00am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/121 "2026-07-21T06:00:43Z")
Nightly Changelog: 8.3.9\*-b20260720 ## Perspective ### Perspective **IGN-16386: Pie Chart tooltips stop rendering when selection.enabled is toggled to True** Fixed an issue in the Perspective Pie Chart where toggling `selection.enabled` to `true` caused tooltips to stop rendering. **IGN-16665: Session user takes precedence over Authentication Challenge user when writing to a tag** Fixed an issue where the Session user's permissions were used during an Authentication Challenge session event. ## Web UI ### Web UI **IGN-16942: Default resource creation into core unless explicitly directed otherwise** Fixed an issue for Gateways which were deployed into any deployment mode where the default resource creation collection would be that deployment mode instead of the `core` collection. Resources created through the UI now correctly default to being created in the `core` collection unless explicitly specified otherwise. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [July 22, 2026, 6:01am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/122 "2026-07-22T06:01:45Z")
Nightly Changelog: 8.3.9\*-b20260721 ## Gateway Network ### EAM & Redundancy **IGN-15297: New API endpoint to approve multiple agents** Added new API endpoints to bulk approve and delete multiple EAM agents ## Alarming ### Voice Notification **IGN-16218: Ambiguous Threads spin up from 8.3 VOIP Voice Notifications** Fixed an issue where each VOIP voice notification would leave behind threads that accumulated until the Gateway was restarted. ## Perspective ### Perspective **IGN-16542: Adding a component from a not-yet-loaded module breaks rendering in running sessions** Fixed an issue where adding a component from a not-yet-loaded module would break rendering in running sessions ## Historian ### Historian **IGN-16492: ArrayEvaluator.validateEvaluators() throws IndexOutOfBoundsException on any array shrink of 2 or more elements** Fixed an issue where an IndexOutOfBoundsException or historian data loss could occur when an array tag's element count decreased by two or more elements in a single update. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [July 24, 2026, 5:50am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/123 "2026-07-24T05:50:30Z")
Nightly Changelog: 8.3.9\*-b20260723 ## Alarming ### Alarm Notification **IGN-16444: Email Settings Lost on Upgrade when in SMTPSETTINGS Table** Fixed an issue where SMTP email server settings could be lost when upgrading a Gateway directly to 8.3 from an 8.1 version prior to 8.1.24. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [July 25, 2026, 5:50am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/124 "2026-07-25T05:50:32Z")
Nightly Changelog: 8.3.9\*-b20260724 ## Tags ### Tags & UDTs **IGN-15709: Relative dynamic tag path cannot be used in a Derived Tag expression** Fixed an issue where the tag() expression function could not resolve relative tag paths (such as [~] or [.]) when used inside Derived Tag expressions. ### Remote Tags **IGN-16348: Event stream tag source with remote tag provider does not work with wildcard operators** Fixed an issue where wildcard operators in Event Stream tag paths did not resolve and failed to emit events when configured with a remote tag provider. **IGN-16871: Event Stream tag source does not respect the subscription "initial" value the same way project Gateway Tag Change scripts do** Fixed an issue where Event Stream tag sources did not correctly filter out initial values when the 'Skip Initial Values' option was enabled. ## Historian ### Internal Historian **IGN-16207: system.historian.queryRawPoints is returning 1 extra record when returnSize set for Internal historians** Fixed an issue where system.historian.queryRawPoints returned one extra record beyond the specified limit when returnSize was set for the Internal Historian. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [July 28, 2026, 5:52am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/125 "2026-07-28T05:52:34Z")
Nightly Changelog: 8.3.9\*-b20260727 ## Gateway Network ### EAM & Redundancy **IGN-16132: Agent Status doesn't signify if agent trial is expired** Resolved an issue where an EAM Agent's status on the Controller remained displayed as "Connected"instead of updating to "Trial Expired: Agent" when the agent's platform trial expired. **IGN-15270: EAM Send Tags task fails when targeting controller if tag editing Authenticated permissions are configured on the tag provider** Fixed an issue where EAM "Send Tags" tasks targeting the local Controller failed on restricted tag providers and ignored the selected Tag Collision Policy. ## Platform Core ### Backup & Restore **IGN-16538: Configuration manager erroneously adds hidden/ignored files to gwbk at root of config directory** Fixed an issue where Gateway backups (.gwbk) included hidden, temporary, or existing backup files (e.g., .DS\_Store, .git, .bak) from the root of the configuration directory. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [July 29, 2026, 5:51am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/126 "2026-07-29T05:51:16Z")
Nightly Changelog: 8.3.9\*-b20260728 ## Web UI ### Web UI **IGN-16697: DNP3 Legacy Driver: Unable to save changes after importing aliased points csv** Fixed an issue where the save button remained disabled after importing an aliased points CSV in the DNP3 driver, even when the imported paths were valid. The save button will now correctly enable when valid changes are made, including through CSV import. ## Alarming ### Alarm Status **IGN-15849: Make Provider level aggregated Alarm Metrics visible in the Tag Browser tree** Added the Alarm Metrics folder for Tag Provider to the Tag Browser, with its visibility controlled by the existing Display Alarm Metrics checkbox. ## Gateway Network ### Gateway Network **IGN-16154: Remote tag providers that use proxying can stay faulted when source gateway is disconnected** Fixed an issue where proxy gateway disconnects could cause unrelated network connections to fault and become unrecoverable ## Data & Logic ### SQL Bridge **IGN-13394: Transaction Group exception when attempting to write boolean to Postgres** Fixed an issue where storing a boolean value through a Transaction Group to a PostgreSQL database failed when the group automatically created its table. Newly created PostgreSQL database connections now create the boolean column using the native boolean type, so these values store successfully. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [July 30, 2026, 5:50am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/127 "2026-07-30T05:50:46Z")
Nightly Changelog: 8.3.9\*-b20260729 ## Historian ### Historian **IGN-15587: system.historian.queryAggregatedPoints() can return excessive columns for CALCULATION return format** Fixed an issue where the system.historian.queryAggregatedPoints() function returned an excessive number of columns when using the CALCULATION return format with multiple tags or aggregates. ## Comms ### OPC **IGN-16744: IEC 61850: settable attributes can't be addressed by Functional Constraint (SP/SE/SG)** Fixed IEC 61850 attributes under multiple Functional Constraints being collapsed into one OPC node. Colliding attributes now use `[FC]`-suffixed addresses, and reads and writes target the correct FC. Existing addresses without the `[FC]` suffix may need to be updated. **IGN-16767: IEC 61850: add -Dignition.iec61850.useBundledSsl property to choose bundled vs. system OpenSSL** Added the `ignition.iec61850.useBundledSsl` system property, allowing the driver to use a compatible system OpenSSL installation instead of the bundled libraries. Bundled OpenSSL remains the default. **IGN-16357: IEC 61850: reserve RCB before enabling reports (SEL Ed. 2.1)** Fixed reports failing to enable on IEC 61850 devices that require explicit RCB reservation. ### Drivers **IGN-16369: IEC 61850: request timeout above 2000ms is not used for the initiate connection request** Fixed IEC 61850 connection initiation ignoring Request Timeout values above 2000 ms. The configured timeout now applies to the initial MMS connection request. **IGN-16675: IEC 61850: Indexed Report Control Blocks not Accessed by Name** Fixed indexed IEC 61850 Report Control Blocks being enabled and routed through the wrong instance. **IGN-16734: IEC 61850: update TMW library to version 5.10.x** Updated the IEC 61850 TMW libraries to version 5.10.2. The minimum supported glibc version on Linux is now 2.27. ## Web UI ### Web UI **IGN-16751: Move Toast location to bottom right** Moved Gateway Toast notifications from the upper-right to the bottom-right of the viewport so they no longer obscure page action buttons. ## Alarming ### Alarm Status \*\*IGN-15639: Acknowledgement timestamp of alarm is from Vision Client OS when acknowledging from Vision Alarm Status Table \*\* Fixed an issue where acknowledging an alarm from the Vision Alarm Status Table recorded the event using the Vision Client's operating system timestamp rather than the Gateway's timestamp. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [July 31, 2026, 5:49am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/128 "2026-07-31T05:49:55Z")
Nightly Changelog: 8.3.9\*-b20260730 ## Gateway Network ### EAM & Redundancy **IGN-15440: API route to start multiple remote upgrades simultaneously** Added a batch API endpoint (/api/v1/upgrade-agents) and updated the EAM web interface to enable upgrading multiple remote agents simultaneously in a single network request. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 4, 2026, 5:54am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/129 "2026-08-04T05:54:13Z")
Nightly Changelog: 8.3.9\*-b20260803 ## Gateway Network ### EAM & Redundancy **IGN-16662: Failing back to master after a restart can cause Tag Collisions allowing tags to get out of sync** Addressed an issue where failing back to redundant master after a gateway restart can cause tags to get out of sync between gateways \*\*IGN-16991: Redundant master stuck at Project state=Unknown after initial pairing \*\* Fixed an issue where restore local of a gateway backup from a master gateway without peer files would cause peer nodes to get stuck out of sync. ## Containers ### Cloud Edition **IGN-17055: Bump bundled Cirrus Link modules to 5.0.4** Updated Ignition Cloud Edition bundled Cirrus Link MQTT modules to version 5.0.4 ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 5, 2026, 6:00am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/130 "2026-08-05T06:00:39Z")
Nightly Changelog: 8.3.9\*-b20260804 ## Historian ### Internal Historian **IGN-16638: system.historian.queryMetadata returns duplicate records against Internal Historian** Fixed an issue where the system.historian.queryMetadata scripting function returned duplicate records when querying against the Internal Historian. ## Tags ### Tags & UDTs **IGN-17010: Tag import fails with serialization error** Fixed an issue where importing tags through the interactive importer could fail with a serialization error, preventing the tags from being imported. ## Platform Core ### Config Persistence **IGN-16185: Update Ignition version requirement for Sip Module** Fix issue where Sip Module did not correctly state its minimum required Ignition version ### Other **IGN-15474: Tanuki Wrapper can crash if interface card(s) do not contain assigned address** Updated Java Service Wrapper to version 3.6.5 which resolves an issue where a network interface card without an address may cause a startup failure. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 6, 2026, 5:52am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/131 "2026-08-06T05:52:35Z")
Nightly Changelog: 8.3.9\*-b20260805 ## Comms ### OPC \*\*IGN-16894: OPC UA Server Drops Subscription After ~1 Minute When Client Requests MaxKeepAliveCount of 1 \*\* Fixed an issue where the OPC UA server stopped sending keep-alive messages on idle subscriptions, causing clients that requested a max keep-alive count of 1 to lose their subscription after about a minute and reconnect repeatedly. **IGN-16986: Update Milo to 1.1.6** Updated the underlying Eclipse Milo OPC UA library to version 1.1.6. **IGN-16987: OPC UA connections deadlock and never recover after session loss during DataTypeTree read** Fixed an issue where an outgoing OPC UA connection could become permanently stuck in a faulted state if the connection was lost while the client was browsing/reading the server's data types. ### Drivers **IGN-17051: Add flag to disable parallel BACnet manifest reads** Added a new `-Dignition.bacnet.parallelObjectManifestReads=` system property as an escape hatch for BACnet devices that can't tolerate the concurrent ObjectManifest reads performed during interrogation. ## Historian ### Historian **IGN-16262: Pre-Processed Partitions aren't working properly in 8.3** Fixed an issue were some aggregates (e.x. Count) were executing against Pre-processed partition tables that should be executed against the raw tables **IGN-6726: Tag History: Querying PPP Tables w/ no Average Processed Value Results in NPE** Prevented a malformed Pre-processed table entry from triggering an error, that entry will be marked as bad quality and logged as of this change ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 7, 2026, 5:52am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/132 "2026-08-07T05:52:37Z")
Nightly Changelog: 8.3.9\*-b20260806 ## Tags ### Tags & UDTs **IGN-15606: system.tag.configure Fails if dataType Not Set for Array Tag** Fixed an issue where the system.tag.configure() function failed to assign a list of values to an Array Tag over the Remote Tag Provider when the data type was not explicitly defined in the payload. **IGN-15980: Tag Migration Logging is not Sufficient** Improved tag configuration migration logging on upgrade to report each tag provider's progress including migrated tag and folder counts. ## Swing ### Designer **IGN-14944: Add arbitrary list of base tag names 'pattern' to new multi instance wizard** Added functionality to the Multi-Instance Wizard to allow you to use a 'List of Names' pattern type and enter in manual UDT instance names. ## Platform Core ### Webserver **IGN-16250: After change in IGN-10444, most JDBC .jar files are getting rejected because they are \>20MB in size** Raised the gateway's multipart upload limit from ~20 MB to 128 MB, allowing large files such as JDBC driver JARs to be uploaded. ## Historian ### Historian **IGN-11509: Power Historian: Changing Partition Interval Doesn't Work If Table Already Exists** Fixed an issue that was preventing re-partitioning of Core Historians ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 8, 2026, 5:52am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/133 "2026-08-08T05:52:54Z")
Nightly Changelog: 8.3.9\*-b20260807 ## Perspective ### Perspective **IGN-5363: Perspective Array Parameters Fail to Evaluate on Embedded View** Fixed array view parameter write race condition on view startup ## Comms ### Drivers **IGN-15060: Add metrics to the Siemens Enhanced Driver** Added sampling diagnostics to the Siemens Enhanced driver. **IGN-15156: Siemens Enhanced: Create a proper subscription model** Improved the performance of the Siemens Enhanced driver subscription model. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 10, 2026, 10:52pm UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/134 "2026-08-10T22:52:31Z")
Release Changelog: 8.3.9\*-b20260810 ## Web UI ### Web UI **IGN-16512: Alarm acknowledgement page shows a 401 error toast after acknowledging the last alarm** Fixed: Prevent alarm acknowledgement page from displaying a spurious 401 error after a user acknowledges the last pending alarm. **IGN-16751: Move Toast location to bottom right** Moved Gateway Toast notifications from the upper-right to the bottom-right of the viewport so they no longer obscure page action buttons. **IGN-16697: DNP3 Legacy Driver: Unable to save changes after importing aliased points csv** Fixed an issue where the save button remained disabled after importing an aliased points CSV in the DNP3 driver, even when the imported paths were valid. The save button will now correctly enable when valid changes are made, including through CSV import. **IGN-16942: Default resource creation into core unless explicitly directed otherwise** Fixed an issue for Gateways which were deployed into any deployment mode where the default resource creation collection would be that deployment mode instead of the `core` collection. Resources created through the UI now correctly default to being created in the `core` collection unless explicitly specified otherwise. **IGN-16370: Gateway polling halts permanently on HTTP errors with no recovery path** Fixed an issue where polling in the Gateway web UI would stop permanently after an HTTP error and not resume even after the error condition cleared. ## Perspective ### Perspective **IGN-5363: Perspective Array Parameters Fail to Evaluate on Embedded View** Fixed array view parameter write race condition on view startup **IGN-16542: Adding a component from a not-yet-loaded module breaks rendering in running sessions** Fixed an issue where adding a component from a not-yet-loaded module would break rendering in running sessions **IGN-16386: Pie Chart tooltips stop rendering when selection.enabled is toggled to True** Fixed an issue in the Perspective Pie Chart where toggling `selection.enabled` to `true` caused tooltips to stop rendering. **IGN-16665: Session user takes precedence over Authentication Challenge user when writing to a tag** Fixed an issue where the Session user's permissions were used during an Authentication Challenge session event. ## Comms ### Drivers **IGN-15060: Add metrics to the Siemens Enhanced Driver** Added sampling diagnostics to the Siemens Enhanced driver. **IGN-15156: Siemens Enhanced: Create a proper subscription model** Improved the performance of the Siemens Enhanced driver subscription model. **IGN-17051: Add flag to disable parallel BACnet manifest reads** Added a new `-Dignition.bacnet.parallelObjectManifestReads=` system property as an escape hatch for BACnet devices that can't tolerate the concurrent ObjectManifest reads performed during interrogation. **IGN-16369: IEC 61850: request timeout above 2000ms is not used for the initiate connection request** Fixed IEC 61850 connection initiation ignoring Request Timeout values above 2000 ms. The configured timeout now applies to the initial MMS connection request. **IGN-16675: IEC 61850: Indexed Report Control Blocks not Accessed by Name** Fixed indexed IEC 61850 Report Control Blocks being enabled and routed through the wrong instance. **IGN-16734: IEC 61850: update TMW library to version 5.10.x** Updated the IEC 61850 TMW libraries to version 5.10.2. The minimum supported glibc version on Linux is now 2.27. ### OPC **IGN-16767: IEC 61850: add -Dignition.iec61850.useBundledSsl property to choose bundled vs. system OpenSSL** Added the `ignition.iec61850.useBundledSsl` system property, allowing the driver to use a compatible system OpenSSL installation instead of the bundled libraries. Bundled OpenSSL remains the default. **IGN-16744: IEC 61850: settable attributes can't be addressed by Functional Constraint (SP/SE/SG)** Fixed IEC 61850 attributes under multiple Functional Constraints being collapsed into one OPC node. Colliding attributes now use `[FC]`-suffixed addresses, and reads and writes target the correct FC. Existing addresses without the `[FC]` suffix may need to be updated. \*\*IGN-16894: OPC UA Server Drops Subscription After ~1 Minute When Client Requests MaxKeepAliveCount of 1 \*\* Fixed an issue where the OPC UA server stopped sending keep-alive messages on idle subscriptions, causing clients that requested a max keep-alive count of 1 to lose their subscription after about a minute and reconnect repeatedly. **IGN-16986: Update Milo to 1.1.6** Updated the underlying Eclipse Milo OPC UA library to version 1.1.6. **IGN-16987: OPC UA connections deadlock and never recover after session loss during DataTypeTree read** Fixed an issue where an outgoing OPC UA connection could become permanently stuck in a faulted state if the connection was lost while the client was browsing/reading the server's data types. **IGN-16357: IEC 61850: reserve RCB before enabling reports (SEL Ed. 2.1)** Fixed reports failing to enable on IEC 61850 devices that require explicit RCB reservation. ## Tags ### Remote Tags **IGN-16348: Event stream tag source with remote tag provider does not work with wildcard operators** Fixed an issue where wildcard operators in Event Stream tag paths did not resolve when configured with a Remote Tag Provider. **IGN-16871: Event Stream tag source does not respect the subscription "initial" value the same way project Gateway Tag Change scripts do** Fixed an issue where Event Stream tag sources did not correctly filter out initial values when the Skip Initial Values property was enabled. ### Tags & UDTs **IGN-15709: Relative dynamic tag path cannot be used in a Derived Tag expression** Fixed an issue with Derived Tag expressions where the tag() expression function would not resolve relative tag paths, such as [~] or [.]. **IGN-15905: Using Java serialization for type com.inductiveautomation.ignition.common.browsing.BasicResult** Fixed an issue where browsing historical tags via the Power Table component in the Designer could trigger frequent Java serialization warning logs in the console. **IGN-15817: Changing a memory tag from a numeric to String datatype with Engineering limits set will cause ClassCastException** Fixed an issue where changing a Memory tag's data type from numeric to string while the Engineering Limit Mode was enabled could result in a ClassCastException. **IGN-15606: system.tag.configure Fails if dataType Not Set for Array Tag** Fixed an issue where the system.tag.configure() function failed to assign a list of values to an Array Tag over the Remote Tag Provider when the data type was not explicitly defined in the payload. **IGN-15980: Tag Migration Logging is not Sufficient** Improved tag configuration migration logging on upgrade to report each tag provider's progress including migrated tag and folder counts. **IGN-17010: Tag import fails with serialization error** Fixed an issue where importing tags through the interactive importer could fail with a serialization error, preventing the tags from being imported. ## Alarming ### Twilio **IGN-15179: Twilio voice calls get stuck in notification blocks** Fixed an issue where an alarm pipeline could get stuck in a Twilio Voice Notification Block when a call ended without the recipient responding. ### Alarm Notification **IGN-16671: Alarm Notification Pipelines becoming stuck in throttled state** Fixed an issue where an Alarm Notification Pipeline Block using consolidation could become permanently stuck and stop sending notifications. **IGN-16444: Email Settings Lost on Upgrade when in SMTPSETTINGS Table** Fixed an issue where SMTP email server settings would be lost when upgrading a Gateway directly to 8.3 from a version prior to 8.1.24. ### Alarm Status **IGN-15849: Make Provider level aggregated Alarm Metrics visible in the Tag Browser tree** Added an Alarm Metrics folder to the Designer Tag Browser that displays provider-level alarm metrics and can be shown or hidden using the Display Alarm Metrics checkbox. \*\*IGN-15639: Acknowledgement timestamp of alarm is from Vision Client OS when acknowledging from Vision Alarm Status Table \*\* Fixed an issue where acknowledging an alarm from the Vision Alarm Status Table recorded the event using the Vision Client's operating system timestamp rather than the Gateway's timestamp. ### Voice Notification **IGN-16218: Ambiguous Threads spin up from 8.3 VOIP Voice Notifications** Fixed an issue where each VOIP voice notification would leave behind threads that accumulated until the Gateway was restarted. ## Historian ### Core Historian _IGN-16199: system.historian.meta functions should error when used on SQL Historian_\* Fixed an issue where the system.historian.storeMetadata() and system.historian.queryMetadata() functions would fail silently or return false success statuses on historian providers that lack metadata capability. ### Internal Historian **IGN-16207: system.historian.queryRawPoints is returning 1 extra record when returnSize set for Internal historians** Fixed an issue where the system.historian.queryRawPoints() function returned one extra record beyond the specified returnSize parameter for the Internal Historian. **IGN-16638: system.historian.queryMetadata returns duplicate records against Internal Historian** Fixed an issue where the system.historian.queryMetadata scripting function returned duplicate records when querying against the Internal Historian. \*\*IGN-15756: Add New Totaled / Oldest Timestamp/Time Remaining Metrics for Edge Historian \*\* Added new routes to expose Edge Historian statistics ### Historian **IGN-11509: Power Historian: Changing Partition Interval Doesn't Work If Table Already Exists** Fixed an issue that was preventing re-partitioning of Core Historians **IGN-16262: Pre-Processed Partitions aren't working properly in 8.3** Fixed an issue were some aggregates (e.x. Count) were executing against Pre-processed partition tables that should be executed against the raw tables **IGN-6726: Tag History: Querying PPP Tables w/ no Average Processed Value Results in NPE** Prevented a malformed Pre-processed table entry from triggering an error, that entry will be marked as bad quality and logged as of this change **IGN-15587: system.historian.queryAggregatedPoints() can return excessive columns for CALCULATION return format** Fixed an issue where the system.historian.queryAggregatedPoints() function returned an excessive number of columns when using the CALCULATION return format with multiple tags or aggregates. **IGN-16492: ArrayEvaluator.validateEvaluators() throws IndexOutOfBoundsException on any array shrink of 2 or more elements** Fixed an issue where an IndexOutOfBoundsException or historian data loss could occur when an array tag's element count decreased by two or more elements in a single update. **IGN-16746: Hide unsupported system.historian scripting parameters the legacy query path can't honor (8.3)** Removed several unsupported parameters from the autocomplete, IDE hints, and documentation for system.historian scripting functions, including {fillModes}, {excludeObservations}, and {includeBounds} for system.historian.queryAggregatedPoints, {excludeObservations} and {includeBounds} for system.historian.queryRawPoints, and {snapshotTime} for system.historian.browse. These parameters will still be accepted by the script parser to prevent existing scripts from breaking, but they will continue to be silently ignored at runtime. ### SQL Historian **IGN-16645: Tag History: Historical Tag Group + Stale Data Detection creates sqlth\_sce entries with improper start and end times, resulting in excessive entries in 8.3** Fixed an issue where a historical tag group with Stale Data Detection enabled caused the SQL Historian to insert a new `sqlth_sce` row on every store (each with an identical `start_time`/`end_time`) instead of advancing the existing row's `end_time`. Over time this bloated the `sqlth_sce` table and slowed history queries. The historian now keeps the current SCE row's `end_time` up to date between sparse data stores and only inserts a new row after a genuine gap in execution. ## Data & Logic ### SQL Bridge **IGN-13394: Transaction Group exception when attempting to write boolean to Postgres** Fixed an issue where storing a boolean value through a Transaction Group to a PostgreSQL database failed when the group automatically created its table. Newly created PostgreSQL database connections now create the boolean column using the native boolean type. ### SFC **IGN-16720: SFC: Enclosed chart fails to load on startup — NPE deserializing embedded parent scope ("parent" = null)** Fixed an issue where an SFC with Persist State enabled that is running inside an Enclosing Step failed to load after a Gateway restart. **IGN-16419: SFC parks a dedicated native thread per blocking/enclosing step, risking thread exhaustion** Fixed an issue where a Gateway running SFCs with many blocking or enclosing steps executing concurrently resulted in an Out Of Memory error. ## Containers ### Docker **IGN-15681: Docker image "-r" should support restoring local-only config files** Added a --restore-local option to the Docker entrypoint script for restoring files that are intended for use in a specific gateway, such as hostname-specific certificates. ### Cloud Edition **IGN-17055: Bump bundled Cirrus Link modules to 5.0.4** Updated Ignition Cloud Edition bundled Cirrus Link MQTT modules to version 5.0.4 ## Swing ### Designer **IGN-14944: Add arbitrary list of base tag names 'pattern' to new multi instance wizard** Added functionality to the Multi-Instance Wizard to allow you to use a 'List of Names' pattern type and enter in manual UDT instance names. ### Vision **IGN-16177: SerializationException when saving Vision Project** Fixed an issue where a ScalableFont type caused a serialization error on project save ## Platform Core ### Webserver **IGN-16250: After change in IGN-10444, most JDBC .jar files are getting rejected because they are \>20MB in size** Raised the gateway's multipart upload limit from ~20 MB to 128 MB, allowing large files such as JDBC driver JARs to be uploaded. ### Config Persistence **IGN-16185: Update Ignition version requirement for Sip Module** Fix issue where Sip Module did not correctly state its minimum required Ignition version ### Other **IGN-15474: Tanuki Wrapper can crash if interface card(s) do not contain assigned address** Updated Java Service Wrapper to version 3.6.5 which resolves an issue where a network interface card without an address may cause a startup failure. ### Backup & Restore **IGN-16538: Configuration manager erroneously adds hidden/ignored files to gwbk at root of config directory** Fixed an issue where Gateway backups (.gwbk) included hidden, temporary, or existing backup files (e.g., .DS\_Store, .git, .bak) from the root of the configuration directory. ## Gateway Network ### EAM & Redundancy **IGN-16662: Failing back to master after a restart can cause Tag Collisions allowing tags to get out of sync** Addressed an issue where failing back to redundant master after a gateway restart can cause tags to get out of sync between gateways **IGN-15440: API route to start multiple remote upgrades simultaneously** Added a batch API endpoint (/api/v1/upgrade-agents) and updated the EAM web interface to enable upgrading multiple remote agents simultaneously in a single network request. \*\*IGN-16991: Redundant master stuck at Project state=Unknown after initial pairing \*\* Fixed an issue where restore local of a gateway backup from a master gateway without peer files would cause peer nodes to get stuck out of sync. **IGN-16132: Agent Status doesn't signify if agent trial is expired** Resolved an issue where an EAM Agent's status on the Controller remained displayed as "Connected"instead of updating to "Trial Expired: Agent" when the agent's platform trial expired. **IGN-15270: EAM Send Tags task fails when targeting controller if tag editing Authenticated permissions are configured on the tag provider** Fixed an issue where EAM "Send Tags" tasks targeting the local Controller failed on restricted tag providers and ignored the selected Tag Collision Policy. **IGN-15297: New API endpoint to approve multiple agents** Added new API endpoints to bulk approve and delete multiple EAM agents ### Gateway Network **IGN-16154: Remote tag providers that use proxying can stay faulted when source gateway is disconnected** Fixed an issue where proxy gateway disconnects could cause unrelated network connections to fault and become unrecoverable ## Security ### Security **IGN-16499: Improve Invalid Role mappings message during 8.1 to 8.3 migration** Added improved invalid role mapping error messaging for migration from 8.1 to 8.3. ## Scripting ### Scripting **IGN-16691: Tag change script editor incorrectly calls stripIndent leading to incorrect warnings about compilation errors** Fixed issue where the tag change script editor would incorrectly warn the user that the script could not compile ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 12, 2026, 5:53am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/135 "2026-08-12T05:53:00Z")
Nightly Changelog: 8.3.10\*-b20260811 ## Web UI ### Web UI **IGN-17008: Application Header emits Gateway edition in lower-case instead of title-case** Fixed an issue where the application header rendered the Gateway edition in all lower-case (e.g. `edge`) instead of title-cased (e.g. `Edge`). ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 13, 2026, 5:51am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/136 "2026-08-13T05:51:31Z")
Nightly Changelog: 8.3.10\*-b20260812 ## Swing ### Vision **IGN-15816: Easy Chart Pen Columns Copied from Empty Datasets if Column Counts Match** Fixed an issue where Easy Chart Tag Pens and Calculated Pens could overwrite each other's column names when saved and reopened ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 14, 2026, 5:51am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/137 "2026-08-14T05:51:05Z")
Nightly Changelog: 8.3.10\*-b20260813 ## Web UI ### Web UI **IGN-16864: New Gateway Name Doesn't Display in Browser Tab Until Restart** Renaming the Gateway now updates the browser tab title as soon as the page is refreshed. Previously the tab continued to show the old Gateway name until the Gateway was restarted. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 15, 2026, 5:50am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/138 "2026-08-15T05:50:30Z")
Nightly Changelog: 8.3.10\*-b20260814 ## Gateway Network ### EAM & Redundancy **IGN-16509: Prevent Upgrades from 8.1 -\> 2027 with EAM upgrade** This issue was solved as part of the work for IGN-15510. The EAM Remote Upgrade task wizard and backend now actively block unsupported direct upgrades from 8.1.x to 2027+, requiring an intermediate upgrade to 8.3.x first. **IGN-15510: EAM Remote Upgrade task should prevent upgrade of 8.0.x gateway with error indicating lack of support for direct upgrade** Enterprise Administration Module (EAM) EAM Remote Agent Upgrade tasks now explicitly block unsupported direct upgrade paths (e.g., 8.0.x to 8.3+, or 8.1.x to 2027+). The upgrade wizard will now display an "Incompatible Version" status for unsupported agents and disable the "Next" button to ensure agents are safely upgraded to intermediate versions first. ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 19, 2026, 5:51am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/139 "2026-08-19T05:51:01Z")
Nightly Changelog: 8.3.10\*-b20260818 ## Alarming ### Alarm Status **IGN-5940: Static alarm associated data properties equal to None removed when using system.tag.configure()** Fixed `system.tag.configure()` from dropping static alarm associated data properties equal to `null` **IGN-15819: incorrect Associated data filter in system.alarm.queryStatus()** Fixed an issue where the system.alarm.queryStatus() function incorrectly treated alphabetical characters following numbers as wildcards when filtering on alarm associated data. ## Infrastructure ### Java - Azul **IGN-17002: Bump to Java 17.0.20 in 8.3** Upgraded the Java Runtime Environment (JRE) version to 17.0.20. ## Gateway Network ### EAM & Redundancy **IGN-17163: Redundancy.StateMonitoring.MasterStateManager Startup Connection Allowance Logger on DEBUG** Updated MasterStateManager logger from DEBUG to INFO ---
**Author:** ![system](https://us1.discourse-cdn.com/inductiveautomation/original/2X/c/c985ea71ed53a8f212f3920ddf03fe05249170b8.png) [@system](https://forum.inductiveautomation.com/u/system)\ **Post date:** [August 20, 2026, 5:50am UTC](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010/140 "2026-08-20T05:50:51Z")
Nightly Changelog: 8.3.10\*-b20260819 ## Tags ### Tags & UDTs **IGN-16694: TagProto falls back to Java serialization for AlertAckMode set to auto** Fixed an issue where setting a memory tag's Alarm Ack Mode to Auto triggered a Gateway log warning indicating a fallback to Java serialization. ## Perspective ### Perspective **IGN-17218: Perspective Gateway.Address Session Property leaves a trailing colon when using a default port** Fixed an issue where the Perspective Session `Gateway.Address` property retained a trailing colon when the Gateway was using the default port for its protocol (80 for http and 443 for https). [Previous page](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010.md?page=6) [Next page](https://forum.inductiveautomation.com/t/nightly-8-3-changelogs-2026-and-beyond/113010.md?page=8)