# Nightly Changelogs - 2019 **URL:** \ **Category:** Ignition Early Access\ **Tags:** changelog\ **Created:** [January 7, 2019, 5:01pm UTC](https://forum.inductiveautomation.com/t/nightly-changelogs-2019/21716 "2019-01-07T17:01:27Z")\ **Posts on this page:** 1\ **Showing post:** 134
**Author:** ![Paul.Scott](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul.scott/32/4578_2.png) [@Paul.Scott](https://forum.inductiveautomation.com/u/Paul.Scott)\ **Post date:** [September 13, 2019, 3:46pm UTC](https://forum.inductiveautomation.com/t/nightly-changelogs-2019/21716/134 "2019-09-13T15:46:42Z")
Nightly Changelog: 8.0.5-b20190913 ## Ignition Platform **14383: Tag Status Page Needs Corrected Links** Fixed an outdated “Relatime Configuration” link located on the Gateway’s Tag Status page. The link should now correctly lead to the Realtime Tag configuration page. ## Perspective The following enhancements have been made to the Time Series Chart and Brushed Time Selector components **14703: Add UI to show the chart is panned or zoomed** The Time Series Chart now has an icon in the top/right corner when the chart is zoomed in to any level past its base time range (1x zoom). Clicking on this icon will return the chart to its base time range. Milestone: Ignition 8.0.5 **14704: Do not allow pan/zoom to exceed the time boundaries of the series data** Both the Time Series Chart and the Chart Range Selector cannot be zoomed out past their standard level of zoom. Previously, these charts could be zoomed out indefinitely showing white space on either side of the charted data. **14690: Maintain zoom while polling** The Time Series Chart will not refresh its time range if it is zoomed in. Previously, polling data would refresh the chart and bring the zoom back out to the base time range (1x). This was cumbersome if you wanted to zoom in closely to scrutinize data. **14818: Allow pan/zoom to be disabled** Both the Time Series and Chart Range Selector have their enablePanZoom properties exposed as component properties so that a user can disable pan zoom behavior if they choose. This property is set to true by default. --- _[View the full topic](https://forum.inductiveautomation.com/t/nightly-changelogs-2019/21716)._