# NOTICES overlay on Perspective Flex Repeater obscuring part of the view **URL:** \ **Category:** Ignition\ **Tags:** perspective\ **Created:** [May 18, 2022, 11:39am UTC](https://forum.inductiveautomation.com/t/notices-overlay-on-perspective-flex-repeater-obscuring-part-of-the-view/59716 "2022-05-18T11:39:48Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [May 18, 2022, 11:39am UTC](https://forum.inductiveautomation.com/t/notices-overlay-on-perspective-flex-repeater-obscuring-part-of-the-view/59716/1 "2022-05-18T11:39:48Z")
![Notices](https://us1.discourse-cdn.com/inductiveautomation/original/3X/f/8/f8da618010741ed23e85cdc622b95b4de8c48b00.png) If we have a comms error on one of the machines in this Flex Repeater view the overlay warnings appear on the controls (and that’s good) but the NOTICES banner obscures the last machine in the list - AC8 in this case. Is there a way to disable the NOTICES footer without opting out of the overlays? Many thanks. ---
**Author:** ![victordcq](https://avatars.discourse-cdn.com/v4/letter/v/f6c823/32.png) [@victordcq](https://forum.inductiveautomation.com/u/victordcq)\ **Post date:** [May 18, 2022, 12:25pm UTC](https://forum.inductiveautomation.com/t/notices-overlay-on-perspective-flex-repeater-obscuring-part-of-the-view/59716/2 "2022-05-18T12:25:46Z")
i have never seen this overlay as white. found em: .ia\_qualityOverlay\_\_footer–unknown: white .ia\_qualityOverlay\_\_footer–error: red .ia\_qualityOverlay\_\_footer–pending: green i guess you could turn this one invisible… No idea if this is the one you would want though. `.ia_qualityOverlay__footer--unknown{display: none}` You might also only want to target your specific components… probably safer to do it by assigning a class `.psc-noUnkownNotices .ia_qualityOverlay__footer--unknown{display: none}` ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [May 18, 2022, 1:16pm UTC](https://forum.inductiveautomation.com/t/notices-overlay-on-perspective-flex-repeater-obscuring-part-of-the-view/59716/3 "2022-05-18T13:16:33Z")
I had never seen the white overlay either - it’s normally red. I wanted to demonstrate the problem so I disabled the PLC device connection for a few minutes. Lo and behold! The overlay was white. Thanks for your (solve everything with) CSS approach. I’ll wait a while and see if any alternatives are suggested. One thing that surprised me was that the notices appears on the flex repeater rather than on the individual instances. Does anyone know how this gets pass up to a higher level? ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [May 18, 2022, 2:41pm UTC](https://forum.inductiveautomation.com/t/notices-overlay-on-perspective-flex-repeater-obscuring-part-of-the-view/59716/4 "2022-05-18T14:41:23Z")
> [@Transistor](#): > > One thing that surprised me was that the notices appears on the flex repeater rather than on the individual instances. Does anyone know how this gets pass up to a higher level? I think the repeater is "smart" enough to roll up quality warnings from lower components. Or something like that; I don't know the exact mechanism by which it works. ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [May 18, 2022, 3:29pm UTC](https://forum.inductiveautomation.com/t/notices-overlay-on-perspective-flex-repeater-obscuring-part-of-the-view/59716/5 "2022-05-18T15:29:24Z")
I’ve implemented a workaround for now. On the Flex Repeater: `props.style.paddingBottom: 22`. ![Notices 2](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/e/6e6c4a833ba67647ffc821a6e43fe3cf1a1f9248.png) The NOTICES now appear below the bottom machine. ---
**Author:** ![Jose\_Hervas\_Chico](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jose_hervas_chico/32/69260_2.png) [@Jose\_Hervas\_Chico](https://forum.inductiveautomation.com/u/Jose_Hervas_Chico)\ **Post date:** [June 6, 2025, 9:36am UTC](https://forum.inductiveautomation.com/t/notices-overlay-on-perspective-flex-repeater-obscuring-part-of-the-view/59716/6 "2025-06-06T09:36:40Z")
> [@Transistor](#): > > `paddingBottom: 22`. hello!! any update on this? Is there already a way to hide this NOTICES overlay? ---
**Author:** ![pascal.fragnoud](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pascal.fragnoud/32/24728_2.png) [@pascal.fragnoud](https://forum.inductiveautomation.com/u/pascal.fragnoud)\ **Post date:** [June 6, 2025, 9:16pm UTC](https://forum.inductiveautomation.com/t/notices-overlay-on-perspective-flex-repeater-obscuring-part-of-the-view/59716/7 "2025-06-06T21:16:07Z")
I'd use css, like Victor suggested. I'm a simple man: If I want something to disappear, I "`display: None`" it. I should make a stamp out of this and slam it on bills and my neighbor.