# NX102 OPC Tags Not found in select programs

**URL:** <https://forum.inductiveautomation.com/t/nx102-opc-tags-not-found-in-select-programs/107240>\
**Category:** Ignition\
**Tags:** opcua, vision, ignition81\
**Created:** [June 10, 2025, 5:06pm UTC](https://forum.inductiveautomation.com/t/nx102-opc-tags-not-found-in-select-programs/107240 "2025-06-10T17:06:14Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![David\_Stone](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/david_stone/32/79749_2.png) [@David\_Stone](https://forum.inductiveautomation.com/u/David_Stone)\
**Post date:** [June 10, 2025, 9:27pm UTC](https://forum.inductiveautomation.com/t/nx102-opc-tags-not-found-in-select-programs/107240/2 "2025-06-10T21:27:26Z")

</div>

Normally this would be because external visibility wasn't set on the tags you want to browse.  
Also there were some issues with Omron OPCUA before:

> [@\[Question\]How to access individual tags inside a UDT from OMRON NX PLC OPC server?](https://forum.inductiveautomation.com/t/question-how-to-access-individual-tags-inside-a-udt-from-omron-nx-plc-opc-server/28236/8):
>
> Apparently there are issues with OMRON.

---

_[View the full topic](https://forum.inductiveautomation.com/t/nx102-opc-tags-not-found-in-select-programs/107240)._