# Omron CJ Series PLC

**URL:** <https://forum.inductiveautomation.com/t/omron-cj-series-plc/15098>\
**Category:** Ignition\
**Created:** [August 17, 2017, 2:00pm UTC](https://forum.inductiveautomation.com/t/omron-cj-series-plc/15098 "2017-08-17T14:00:32Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [August 17, 2017, 2:27pm UTC](https://forum.inductiveautomation.com/t/omron-cj-series-plc/15098/2 "2017-08-17T14:27:27Z")

</div>

The current Omron driver is not FINS compatible (Ours are ETN21), so I’m having to use KepWare. No new drivers will be worked on until Ignition 8 is released, as per [this thread](http://forum.inductiveautomation.com/t/omron-driver-for-ignition-update/9879/15?u=jordancclark).

I can’t say if you would be able to get useful information using @pturmel’s [Ehternet-I/P driver](http://forum.inductiveautomation.com/t/ethernet-ip-i-o-module/12362?u=jordancclark), but it may be worth a look.

---

_[View the full topic](https://forum.inductiveautomation.com/t/omron-cj-series-plc/15098)._