# Omron FINS PLC ReconnectWait

**URL:** <https://forum.inductiveautomation.com/t/omron-fins-plc-reconnectwait/96217>\
**Category:** Ignition\
**Tags:** ignition81\
**Created:** [September 20, 2024, 6:53am UTC](https://forum.inductiveautomation.com/t/omron-fins-plc-reconnectwait/96217 "2024-09-20T06:53:19Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [September 20, 2024, 10:30am UTC](https://forum.inductiveautomation.com/t/omron-fins-plc-reconnectwait/96217/2 "2024-09-20T10:30:48Z")

</div>

You may find this thread of interest.

> [@Edge 8.1.7 with OPC UA Omron FINS/TCP connection experiencing overloading and slow read](https://forum.inductiveautomation.com/t/edge-8-1-7-with-opc-ua-omron-fins-tcp-connection-experiencing-overloading-and-slow-read/60167):
>
> Hi All, I’m using edge 8.1.7 with OPC UA Omron FINS/TCP connection. On the Status\>Connections\>Devices page, it shows overloading of PLC. The write/sending of values to the plc is instantaneous, but the reading from PLC to gateway is slow. Having delay of 3-6++ seconds. While reading the OMRON FINS Driver manual, it mentioned about FINS Settings and Request Optimization. For FINS Settings, right now all the values are default:0 in the configuration. But on the actual PLC, we have tuned the…

---

_[View the full topic](https://forum.inductiveautomation.com/t/omron-fins-plc-reconnectwait/96217)._