# Omron Fins TCP/IP

**URL:** <https://forum.inductiveautomation.com/t/omron-fins-tcp-ip/58532>\
**Category:** Ignition\
**Created:** [April 17, 2022, 3:57pm UTC](https://forum.inductiveautomation.com/t/omron-fins-tcp-ip/58532 "2022-04-17T15:57:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Yee\_May\_Kyaw](https://avatars.discourse-cdn.com/v4/letter/y/57b2e6/32.png) [@Yee\_May\_Kyaw](https://forum.inductiveautomation.com/u/Yee_May_Kyaw)\
**Post date:** [April 17, 2022, 3:57pm UTC](https://forum.inductiveautomation.com/t/omron-fins-tcp-ip/58532/1 "2022-04-17T15:57:42Z")

</div>

Hi Guys,  
Is it Possible that Omron CJ2M Series to do simulation with Ignition without actual PLC hardware?

---

<div class="post-metadata">

**Author:** ![andrews](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@andrews](https://forum.inductiveautomation.com/u/andrews)\
**Post date:** [April 17, 2022, 10:21pm UTC](https://forum.inductiveautomation.com/t/omron-fins-tcp-ip/58532/2 "2022-04-17T22:21:32Z")

</div>

You can’t simulate that plc connection per say. But you can use simulation aids [Ignition Third-Party Module Showcase](https://inductiveautomation.com/moduleshowcase/module/automation-professionals-llc-simulation-aids) by @pturmel to simulate the data, tags, etc… which the PLC would generate.

---

<div class="post-metadata">

**Author:** ![jespinmartin1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jespinmartin1/32/57175_2.png) [@jespinmartin1](https://forum.inductiveautomation.com/u/jespinmartin1)\
**Post date:** [April 18, 2022, 1:24am UTC](https://forum.inductiveautomation.com/t/omron-fins-tcp-ip/58532/3 "2022-04-18T01:24:02Z")

</div>

If you have your simulator ready, just connect it by creating a device connection using the TCP Driver.  
Ignition also has a built in [simulator](https://docs.inductiveautomation.com/display/DOC81/Programmable+Device+Simulator).