# Omron NJ CPU

**URL:** <https://forum.inductiveautomation.com/t/omron-nj-cpu/9486>\
**Category:** General Discussion\
**Created:** [December 25, 2014, 10:00pm UTC](https://forum.inductiveautomation.com/t/omron-nj-cpu/9486 "2014-12-25T22:00:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![professor\_jonny](https://avatars.discourse-cdn.com/v4/letter/p/8e8cbc/32.png) [@professor\_jonny](https://forum.inductiveautomation.com/u/professor_jonny)\
**Post date:** [December 25, 2014, 10:00pm UTC](https://forum.inductiveautomation.com/t/omron-nj-cpu/9486/1 "2014-12-25T22:00:18Z")

</div>

What are my options with connecting to an Omron NJ series.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [December 26, 2014, 3:15pm UTC](https://forum.inductiveautomation.com/t/omron-nj-cpu/9486/2 "2014-12-26T15:15:56Z")

</div>

I think if you need to connect today your best bet is to use Kepware.

That being said, we have an NJ driver under development right now, so in a couple months you’ll be able to use our driver.