# Omron NJ Driver Beta

**URL:** <https://forum.inductiveautomation.com/t/omron-nj-driver-beta/11288>\
**Category:** Ignition\
**Created:** [February 29, 2016, 11:49pm UTC](https://forum.inductiveautomation.com/t/omron-nj-driver-beta/11288 "2016-02-29T23:49:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![richardNZ15](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/richardnz15/32/33373_2.png) [@richardNZ15](https://forum.inductiveautomation.com/u/richardNZ15)\
**Post date:** [February 29, 2016, 11:49pm UTC](https://forum.inductiveautomation.com/t/omron-nj-driver-beta/11288/1 "2016-02-29T23:49:51Z")

</div>

I have just started a large project involving an Omron NJ PLC. I have started using the Omron NJ driver but noticed a pretty large bug with the tag table.

I do an export of tags from Sysmac Studio as instructed by the Ignition help. Importing the text file works fine and will generate all the tags needed in the table.

However when i click the “Save Changes” button, the Ignition Gateway throws up an “[color=#FF8000]Internal Error[/color]” page.  
I have discovered that this results in the tag table not being saved to the gateway, because any time i Enable/Disable the Device or restart the gateway, the tag table is lost.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [March 1, 2016, 12:27am UTC](https://forum.inductiveautomation.com/t/omron-nj-driver-beta/11288/2 "2016-03-01T00:27:29Z")

</div>

Hey, thanks for reporting this. I believe we’ve found and fixed this already. The Omron module in the 7.8.2 release candidate should include the fix.

[inductiveautomation.com/downloads/beta](https://inductiveautomation.com/downloads/beta)

---

<div class="post-metadata">

**Author:** ![richardNZ15](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/richardnz15/32/33373_2.png) [@richardNZ15](https://forum.inductiveautomation.com/u/richardNZ15)\
**Post date:** [March 1, 2016, 1:03am UTC](https://forum.inductiveautomation.com/t/omron-nj-driver-beta/11288/3 "2016-03-01T01:03:27Z")

</div>

Right you are, thanks for pointing out that new release. Issue seems resolved. ![:thumb_left:](https://us1.discourse-cdn.com/inductiveautomation/original/1X/e26afb081ddde6df016df6ee49159cf56aaca688.gif ":thumb\_left:")