# Omron NJ PLC Driver in Trial Mode

**URL:** <https://forum.inductiveautomation.com/t/omron-nj-plc-driver-in-trial-mode/55451>\
**Category:** Ignition\
**Created:** [January 27, 2022, 6:02pm UTC](https://forum.inductiveautomation.com/t/omron-nj-plc-driver-in-trial-mode/55451 "2022-01-27T18:02:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Curlyandshemp](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@Curlyandshemp](https://forum.inductiveautomation.com/u/Curlyandshemp)\
**Post date:** [January 27, 2022, 6:02pm UTC](https://forum.inductiveautomation.com/t/omron-nj-plc-driver-in-trial-mode/55451/1 "2022-01-27T18:02:40Z")

</div>

I have an application where I am connecting to my very first Omron NX1P2-9024DT1 PLC.  
I want to test the OMRON NJ driver in trial mode before committing to the customer a license upgrade purchase for the module.

I have the module in Trial mode, reset the Trial License to run 2 hours, set up comms to PLC ( verified by Ping ), but the status of the PLC Driver is always in IDLE.

Will this module work in Trial Mode?  
I have no tags set up yet, as the Import Tag from \*.CSV is not working either.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [January 27, 2022, 6:12pm UTC](https://forum.inductiveautomation.com/t/omron-nj-plc-driver-in-trial-mode/55451/2 "2022-01-27T18:12:00Z")

</div>

It works in trial.

You can set `com.digitalpetri.enip.ChannelFsm` to DEBUG and then edit/save to see if you’re actually getting an initial connection or not.

My guess is since you have no tags that you connect, get disconnected for inactivity, and the driver is lazy and won’t reconnect until actually needed, so you remain in the Idle state.

---

<div class="post-metadata">

**Author:** ![Curlyandshemp](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@Curlyandshemp](https://forum.inductiveautomation.com/u/Curlyandshemp)\
**Post date:** [January 27, 2022, 6:15pm UTC](https://forum.inductiveautomation.com/t/omron-nj-plc-driver-in-trial-mode/55451/3 "2022-01-27T18:15:24Z")

</div>

OK will try that.  
I manually entered a tag in Tag Broswer, and after getting correct syntax, PLC driver status transitioned from Idle to Connecting . I currently am connecting remotely to site and have the Omron PLC disconnected , so this is progress.

thanks

---

<div class="post-metadata">

**Author:** ![johannes.bo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/johannes.bo/32/27628_2.png) [@johannes.bo](https://forum.inductiveautomation.com/u/johannes.bo)\
**Post date:** [January 27, 2022, 7:05pm UTC](https://forum.inductiveautomation.com/t/omron-nj-plc-driver-in-trial-mode/55451/4 "2022-01-27T19:05:04Z")

</div>

I am using NJ driver against NJ and NX PLSs. No issues, either trial or licensed

---

<div class="post-metadata">

**Author:** ![Curlyandshemp](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@Curlyandshemp](https://forum.inductiveautomation.com/u/Curlyandshemp)\
**Post date:** [January 27, 2022, 10:31pm UTC](https://forum.inductiveautomation.com/t/omron-nj-plc-driver-in-trial-mode/55451/5 "2022-01-27T22:31:00Z")

</div>

Tag import was not work as i saved as a CSV file and not as a Tab Text file.  
Works now